ATF: Big Country - Circuit breaker for Slides

[66Vettster]

It seems that I read somewhere that Heartland is recommending replacing the 50 amp circuit breaker with a 80 amp circuit breaker.? Where is the circuit breaker located? I have been having trouble when closing my slides. The large slide stops right before it goes in all the way. I wait a couple of minutes and it will go in. Any information would be appreciated.

 

[Speedy]

It is located in the right side compartment behind the battery, mounted on the bulkhead. It is in a group of breakers on a bus bar. I removed it and replaced with a 80 amp which is larger in size, so I moved it closer to the compartment door.

 

[cookie]

Follow the heavy red wire from the hydraulic pump to the bank of breakers.
I just replaced my 50 amp breaker with another of the same size.
No extra wiring needed.
Cost was about $10.
You might get some needed information by looking in the Tools area at the top of the page. You will find THIS.

Peace
Dave

 

[66Vettster]

Thanks for the advise. I contacted Heartland and they recommended staying with the 50 amp circuit breaker. I bought a couple of them. One to install and one for a spare. Seems to work fine now.