ATF: Cyclone - couches in the garage

[Jim_Mary_Lou]

the legs on the couches in the garage do not reach the floor when folded down. What is their purpose?

 

[ILH]

I assume you're referring to the bottom bunk? If the bottom bunk is not decending enough for the legs to touch the floor, you will need to adjust the bottom limiter - so that it can descend a bit more. The process is described in another thread.

 

[AJJONES]

They should be longer, please send me your information and i will have somebody from service contact you ASAP.

 

[Jim_Mary_Lou]

the brackets on the back of the couches are bottom out on the channels with the drive chain inside

 

[Jim_Mary_Lou]

3800 serial 252604

 

[scottyb]

My 4100 is at the dealer for other warranty work. Same thing, the legs are also too short on mine and that is one of the items on their to do list. Mine are all 3"-4" from the floor and the track is bottomed out. I suspect a batch of short legs got in the mix.

 

[ILH]

Either that or the track was mounted too high on the wall. Curious.

 

[scottyb]

Either that or the track was mounted too high on the wall. Curious.

Could be. If that's the case, I'm glad it is because I need the clearance for my Mule. The bottom brackets of the bunks barely clear it now.

 

[Jim_Mary_Lou]

I hope the legs a short because re mounting the wall brackets would be messy

 

[ILH]

I hope the legs a short because re mounting the wall brackets would be messy

Agreed, but if the benches (bed) ends up being too high, even a tall man will have his legs swinging in the air when he sits at the table!

 

[boatto5er]

3800 serial 252604

Recommend you call Heartland Customer Service (number is on the forum Portal page) and have your VIN number handy. Reference AJ's post if needed when you talk to them.