Not had much luck getting replies from Razor community, so I will post question here. I have a 2008 Razor 3110 fifth-wheel. The metal piece that attaches to the floor at the beaver tail was loose when I got the trailer a month ago. Turns out the reason it is not secure to the floor is that the plywood was cut crooked and is off by about a 1/2inch. The screws that go into the floor at one point were hitting nothing. How to fix problem? Buy a larger angled piece to go on the floor. Mine is only 1-1/4 by 1-1/4. I need something larger to work. What does the Cyclone use on the floor and what size is it. Maybe I can buy this piece and put in my trailer. Your input is appreciated. Capt.