Bidet seat recommendations

[Battery Powered]

Anyone put in a bidet seat? Looking for recommendations for a Thetford mod 42072
Style II High

 

[RoadJunkie]

I installed THIS unit. But (no pun intended), I had to use adaptive means because the included connection piece was a bit too long. I have the PEX tool, so this wasn't an issue. I didn't look for "Shark" options.

 

[Battery Powered]

Thanks, I will check it out.

 

[taskswap]

We've tried several brands, including the sibling of the one above, the BioBidet SlimTwist: https://www.amazon.com/Bidet-SlimTwist-Simple-Toilet-Attachment/dp/B08HDKKFGP

No matter what you get, there's a good chance you'll need to monkey with it a bit. Our Milestone came with a toilet that has an odd inlet (I think it worked out to 1/2 MHT vs the usual NPT or GHT) so we had to fuss around with different fittings to get one that worked, and the toilet itself has an odd bump on the back of the pedestal that interfered with the bidet mounting. We had to cut the plastic flange a bit to get it on there. Still, glad to have it.

 

[Battery Powered]

I was checking out the water connection at the toilet and I will have to modify it. We definitely have the hump. I think it's where they put the air gap?

 

[taskswap]

Maybe. Ours is hollow and appears to just be decorative - there's a hole in the back you can reach your hand in, and I can reach my hand up into that bump. In any case, it interfered with the typical bidet installation plate that has two rotating rings with slots in them for the bolts. I managed to get ours attached but it's too far forward and not as comfortable to use as I'd like. As you can see, the plate is just barely fitting in front of that bump and it really wants to be 1-2" farther back. I may have to cut it to get more clearance.

 

[Battery Powered]

That's what ours looks like, I did find a few more options......lol