Re: Eureka Vacuum Will not start after winter storage.
Hi Wayne. The first thing I would do is remove the bulkhead and check to see if the vacuum came unplugged, or check the low voltage bell wire that attaches to the vacuum.
When you are in there if all appears ok, try to jumper the low voltage terminals with a screwdriver and see if it starts up.
If all fails, check the voltage at the receptical that the vacuum is plugged into. Be certain you have 120 volts.
If no current there, turn off and back on the breaker that controls that receptical. One other thing just came to mind is that may be on your GFCI receptical in the bedroom. In fact maybe you should check that first of all.
Peace
Dave