SilverRhino
Well-known member
When we purchased our BC, both the "Outside Security" lights were wired to one switch. Really did not think this was the best situation so I always meant to correct it. Finally on our latest trip to Colorado, I remembered to bring everything along that I would need and installed the 4 bank switch.
When I pulled the old 3 bank switch out, I checked over the wiring and did not really care for the use of twist locks on the joints. I redid all the connections using solder and shrink tubing to insure good connections. Now we can at least decide which side of the coach to light up, if needed.
Obviously this was not a priority for my wife.......otherwise it would not have taken all this time to correct!
When I pulled the old 3 bank switch out, I checked over the wiring and did not really care for the use of twist locks on the joints. I redid all the connections using solder and shrink tubing to insure good connections. Now we can at least decide which side of the coach to light up, if needed.
Obviously this was not a priority for my wife.......otherwise it would not have taken all this time to correct!
