FIXED: Fan Noise from Converter (replaced unit)

[danemayer]

Thanks again! I understand where the ground wire goes on the RV (left side buss bar), but how/where do I connect the other end, the end that connects to the replacement unit? There is no obvious attachment point.

For the end that connects to the replacement unit, please read post #17 again and look at the picture with the two buss bars. Check the upper buss bar with a meter or call Parallax to ensure it's the ground buss.

Also, if you're referring to the "left side buss bar" in the picture of the Landmark breaker box, the buss bar on the left is not the ground buss. Please look at the pictures again and identify the buss bar that has a bunch of bare copper wires attached. Your circuit breaker panel may look different, but you'll still be looking for a buss bar that has a bunch of bare copper wires attached.

If all this is not extremely clear, you should consider getting help from a licensed electrician. It could be serious if you get it wrong.