front landing gear, how high can it go?

[StevenJ]

We have a 2008 3600RL, does anyone know how high the front jacks can go? Is there a stop or a line on the jack to know when it's at the end? My wife thinks they will fall out and I can't really say they won't, I would think there is a safty stop or something. Thanks, Steven J.//heartlandowners.org/images/icons/icon6.gif

 

[JohnDar]

I'm not sure if this answers your question, but I gleaned this off the Venture Mfg. site, Owners Manual. If you follow this link, it will take you to their website page for the manuals.
http://www.venturemfgco.com/standard-landing-gear.html

[FONT=Arial,Bold][FONT=Arial,Bold]System Specifications:[/FONT][/FONT][FONT=Arial,Bold]
[/FONT]Stroke ~ 20 inches
Drop Leg Adjustment ~ 16 inches
Manual Crank torque w/o Power Kit @ rated load ~ 145 in. lbs.
Single Power Kit Amps @ rated load ~ 30*
Speed @ rated load ~ 2.5 in./min.
Dual Power Kit Amps @ rated load ~ 24* ea. Power Kit​

Speed @ rated load ~ 3.0 in./min.

All of the manuals are also found in the Tools tab at the top of this page.

 

[westxsrt10]

A good way to test their limits is test them yourself with your rig connected to you truck. Then paint a red line on the leg marking the higest and lowest most points.

 

[JohnDar]

If you do that, keep an eye and ear on the operation. Running the motor once the limit has been reached seems to be cause for blowing fuses and breakers.

 

[rumaco]

all the way to the end!

 

[Bob&Patty]

Or it blows the fuse.

 

[Larryheadhunter]

The click, click, click you hear, and the landing gear stops moving usually tells you when you have reached the highest it will go. I wouldn't keep pressing the button, once you reached that spot, as many of the previous posters said, you might not like the results.

 

[StevenJ]

Ok wait for the clicking and stop, I was wondering how many inches it will extend out before bad things happen.

 

[jnbhobe]

Hopefully you'll hear click click click, most people hear two clicks and the fuse is blown, so be real carefull then mark the limits