WAdams
Member
So we have a new (bought this past summer) 2016 Oakmont 385QB. The nights in Virginia are starting to get quite a bit chillier than we are used to. I went to use the furnace by turning the heat on at the thermostat just inside the front door (near the bathroom). The propane is on and flowing, the igniter kicks on, and lots of heat comes out the vents on the outside of the camper. The only register that gets hot (and I mean super hot) or has any real air flow is the front bathroom. Very little air comes out the registers in the living room, bunk house bedroom, and rear bathroom. What does come out is not hot. Even after an hour of running it. My thought is that the ducting somehow dislodged from the rear of the furnace. Are there multiple ports on the back of the furnace? Or is there just one?
Also, does anyone know how to reach the rear of the furnace to see? Is there an easy way to actually see the ducting from the underbelly? I hate removing panels and messing with stuff just to find out I can't see what I had hoped to see.
Lastly, there is a screen on the wooden casing (next to the fireplace). What is that for? Is that a return for the furnace (within a close proximity) or is that space open for the fireplace?
Also, does anyone know how to reach the rear of the furnace to see? Is there an easy way to actually see the ducting from the underbelly? I hate removing panels and messing with stuff just to find out I can't see what I had hoped to see.
Lastly, there is a screen on the wooden casing (next to the fireplace). What is that for? Is that a return for the furnace (within a close proximity) or is that space open for the fireplace?