How can I verify I have #42 lippert spindles / axle?

[dougw]

So I'm finally about to do my disk brake upgrade and want to make sure before I order a set of kodiak disk that the lippert axles I have are the #42.

I remember a long while ago there was a link to a PDF that had some specs. I can't seem to find that or any info at lippert.

Any thoughts on how I can verify that. I have all the numbers off the axle tag but can't seem to relate anything to the spindle size.

Thanks
Doug

 

[kakampers]

Most Lippert axles have a sticker/label on the axle in just about the center....info you need may be contained there...

 

[jnbhobe]

I'm pretty sure most if not all 6-7-8-K axels use a #42 spindle. Call Kodiak and tell them what you have for axels. I had to use a different outer bearing on my 7K axels and Kodiak used 8k hubs and rotors when I first made the change. You also will need the 5 hole caliper brackets. When I changed to Mor-Ryde IS they used the same hubs and bearings.