Heartland Owners Club - Installing the Plaque
Installing Plaque to the Frame:
Click here (link to be added later) to download a PDF file of these instructions with photos.
Installing Plaque to the Frame:
- Remove 2 screws (phillips head) from back of frame and place frame front side down onto a solid surface
- Place plaque onto back of frame with the sold black side of the plaque facing up
- Using screws from step 1 above, screw plaque onto back of frame. Secure screws tightly
- Remove both screws (phillips head) from both ladder brackets
- On your ladder, between the 2 steps you have decided to mount your plaque, reassemble the brackets using the screws removed in step 1 above. The two halves of the brackets go around the left and right upright (long sides) of the ladder - like a clam shell. Do not secure the screws tightly just yet - only snug enough so you can still rotate the brackets and slide them up/down the ladder if needed
- Remove both cotter pins from the plastic pins that are attached to the back of the frame
- Adjusting the brackets (rotating, sliding up or down) on the ladder as needed, slide the plastic frame pins down into the holes on the top of the brackets
- Perform a final adjustment to each bracket to ensure the location is to your liking, then secure the 2 screws on each bracket tightly
Click here (link to be added later) to download a PDF file of these instructions with photos.
Last edited:
