LED dimmer

[papa_will]

I have a torque 325. I would like to wire a dimmer switch on the couch slide lights. My question is can I replace the switch with a dimmer, and if so, how do you take the current switch off the wall

Thank you
Will

 

[cookie]

Squeeze the center of the part that moves and it should pop off. Then you will see the screws that hold it in place.
If your lights are LED you will need a dimmer that is compatible with the LED.

Peace
Dave

 

[SNOKING]

Be aware that most dimmers require a ground wire also. Sometimes the negative/ground will be tucked in the wall with the hot leads. The ones I use actual dimmer the lights on the negative/ground to the lights. Chris

 

[papa_will]

Squeeze the center of the part that moves and it should pop off. Then you will see the screws that hold it in place.
If your lights are LED you will need a dimmer that is compatible with the LED.

Peace
Dave

Thank you so much. That did it.

- - - Updated - - -

Be aware that most dimmers require a ground wire also. Sometimes the negative/ground will be tucked in the wall with the hot leads. The ones I use actual dimmer the lights on the negative/ground to the lights. Chris

THANK YOU for the help