Level up

[Shortest Straw]

I need to replace a couple of lines for the Levelup system that are leaking badly. I cannot just take them off and run down to have new ones made. Does anyone know what type of ends need to be on the lines to connect properly? I know the psi needs to be 3k or higher as these are the crappy returns that are leaking.

 

[travelin2]

Which ones need replaced?
Unless it’s the front landing jacks any of the others can be removed and replaced
At this very moment I have a rear jack in the shop for repair.
All slides are open, obviously front jacks down, rear jacks are retracted. If we we’re staying in it, I’d level the old fashioned way with blocks and call it good
I’ve had new hoses made. I’ll look for a receipt. If I find one I’ll post back here

 

[travelin2]

This part # is on one of my receipts…G25170-0404

Rubber braided hose … 1/4” MXT Gates Hose

Gates 2 Wire Hose Fitting - Gates G25170-0404

Gates 2 Wire Hose Fitting - Gates G25170-0404 | TruckAC.com is your direct source for Air Conditioning, Heating, APU, and Hydraulic Parts for light to heavy-duty truck, bus, and off-road equipment. We offer brand specific products, backed by a manufacturer's warranty, competitive pricing, and...

www.truckac.com

 

[Shortest Straw]

This part # is on one of my receipts…G25170-0404

Rubber braided hose … 1/4” MXT Gates Hose

Gates 2 Wire Hose Fitting - Gates G25170-0404

Gates 2 Wire Hose Fitting - Gates G25170-0404 | TruckAC.com is your direct source for Air Conditioning, Heating, APU, and Hydraulic Parts for light to heavy-duty truck, bus, and off-road equipment. We offer brand specific products, backed by a manufacturer's warranty, competitive pricing, and...

www.truckac.com

The jacks are not leaking, it is the orange return hoses that are. I can replace myself, I just needed to know what end needs to be on them.