SJH
Past Washington Chapter Leaders
As an Update...this problem seemed to disappear after a few days of using the light switch. Strange...I counted at least a 10 second delay after throwing the switch before the lights popped on the day we took delivery. Now it is almost instant! Another week and maybe it will be normal 
sdgrossman1994
Member
You probably had some internal corrosion built up in the switch that had to be worked out. Glad ot hear that your lights are working fine.
I have a 34TSRE Elkridge and found the light switch getting hot, upon investigating I noticed that the connectors used were not the correct size for the wire that was being used, the connectors charred and wires pulled or should I say fell out of the connectors. I had all the Yellow (approved for #10 and 12 awg wire) connectors with #14 wire replaced under warranty. I won't go into the 110 volt side here.
SJH
Past Washington Chapter Leaders
Hello!
Wow...I started this post over a year ago! Interesting that it was found again. Anyway...for the rest of the story...The light switch was apparently bad. It did over heat and seemed to melt on the inside. I replaced the switch for a couple bucks and problem solved. No more delay or dimming issues.
Best Wishes!
Wow...I started this post over a year ago! Interesting that it was found again. Anyway...for the rest of the story...The light switch was apparently bad. It did over heat and seemed to melt on the inside. I replaced the switch for a couple bucks and problem solved. No more delay or dimming issues.
Best Wishes!
Similar threads
