manually retracting slideouts

[frazer]

Hello

I have a 2013 bh3010re with a busted hydraulic line. The trailer is on a seasonal site in alberta and i need to retract all the slides before the snow flies. I hear you can manually retract the slides but I cant find the info on how to do it. Can anyone help me please on this.

Thank you
Frazer

 

[JohnDar]

The manual retraction method still requires having intact hydraulic lines and using a drill with a 1/4" hex bit to drive the pump motor.

If you can get them in place, you might be able to pull them in with come-a-longs or ratchet straps under the slide.


Sent from my iPhone using Tapatalk

 

[hoefler]

Under the slides along the frame, there is a square tube that runs between both supports. Get a crescent wrench and rotate the square tube.

 

[frazer]

Thanks for the info. I will give it a try.

 

[hoefler]

Also, if you have the selector valves in the basement near the pump, you can isolate the leaking unit by shutting the valve to it, and use the pump to move the other slides.