Mattman
Well-known member
Okay, so not my tow vehicle. But my Dad is having problems with his 2003 Sierra with the 5.3. We put a reader on it. Says mass flow sensor fault, as well as multiple Mis fires. He did a new MAS, plugs, wires, and fuel filter. Truck is still acting the same. At idle it is fine. Drive it down the road and acts up. Scaner shows it faulted at 2460 rpm, 30% load, and 57 mph. Map sensor seems fine, and throttle position as well. The fuel rail read outs seemed strange. Bank 2 had a negative number, while bank 1 was positive. That normal?
Any one have experience in this area?
Any one have experience in this area?