Missing or by design

[creeper]

Trying to get a definitive answer and the Factories take on it. I don't plan on driving to the dealer to fix , but don't want to fix something that's not supposed to be fixed. Also if I need to add screws , what type.

The front lower cap is not attached to the frame. There are holes in the frame, but no screws. I was wondering if that's the way it's supposed to be or did they forget.

Screw holes are on the other side of these arrows.

These arrows point to actual screw holes.

 

[Niles]

I have a 3670 and there is no screws in the front of the panel.

 

[mrcomer]

Hey creeper,
My Landmark does not have any screw holes in the front either. I have not seen any other Landmarks or Bighorns for that matter that have screws in the front.

Mark

 

[creeper]

Not in front of the panel, but inside the front compartment. There are holes in the bottom pan that would allow you to bolt the bottom pan to the inside of front panel on the aluminum frame.

 

[vangoes]

On my 3055 there are sheet metal screws in there......sometimes! They constantly vibrate out and I generally find them somewhere inside the compartment. Without them, there is a considerable gap between the framing and the inside sheeting

 

[geeksrus]

I checked mine yesterday and there are screws across where you indicated... not sure of the type.

Suggest you get this resolved pronto.

Thanks for the heads-up. EH!

 

[creeper]

Thanks Geekrus.

Does the Factory still participate in this forum? If they do maybe they can give me the type of screw.


Admin note: Coley is traveling all week and as such, is unable to respond as timely as he would like. Please consider calling Customer Service at 877-262-8032. Jim

 

[jbeletti]

Hi all,

Use #8 x 1 Zinc Plated TEK Screw in each hole in every hole in the front pan. How many screws are used varies due to fabrication techniques by model.

Jim