MORryde suspension upgrade

[Dixie_Chicken]

Anyone know if it's possible to add the MORryde system to the wide track suspension on the NT?

 

[Chrisandsama]

Anyone know if it's possible to add the MORryde system to the wide track suspension on the NT?

Which Moryde components are you curious about?

 

[Dixie_Chicken]

Either the CRE3000 or the SRE4000.

 

[Chrisandsama]

Either the CRE3000 or the SRE4000.

My sister-in-law asked me about this also as she has a North Trail with the wide track. Hopefully someone with the wide track will chime in, if not as soon as i find out i will let you know.

 

[jayc]

why not call MORryde and ask? 574 293-2581

 

[Silverado23]

The mor ryde cre3000 might work.
It allows up to a 42 inch wheelbase.
Check the qualifier worksheet.
http://www.morryde.com/uploads/downloads/1561574042-MOR367-CRE3000%20Qualifier_v6.pdf


An alternative is the lippert equa flex equalizers.
I have these installed on my north trail

https://www.etrailer.com/Trailer-Leaf-Spring-Suspension/Lippert-Components/LC314336.html

https://store.lci1.com/wide-stance-tandem-axle-kit-equa-flex-equalizers-314336.html

 

[Dixie_Chicken]

Thanks Silverado23...these are a bit less expensive as well. Are you happy with the performance of the Equa-Flex?

 

[Silverado23]

Thanks Silverado23...these are a bit less expensive as well. Are you happy with the performance of the Equa-Flex?

Yes, They were a good upgrade over the stock equalizers and pretty easy to install. Plan on replacing all your stock bushings in your leaf springs. The plastic bushing in mine were pretty worn at the time I upgraded to the Equa-flex little over the first year of having my NT. I have had the equa-flex on now three years. And they still work well.

 

[robert78.5]

I was under my 2010 305RW winterizing and was looking at the suspension. The shackle plate holes are getting wore to the point that i can see the bottom of the hole beside the bolt head. It looks like a Lippert system according to my manuals. Can i use the wet Morryde upgrade kit? The plates look a lot thicker.

 

[jnbhobe]

Yes you can