Need Help Mounting 3055 Bedroom TV

[rdfagg]

On the 2011 model 3055 there is a place in the bedroom for a small TV. Is the wall behind that reinforced or strong enough to use a full motion wall mount ? My mount is set up for the middle with two screws one below the other or on the same stud. Thank you.

 

[karykatz]

If you ordered your unit with the TV option, there is a built in backer wall that will hold your swing arm mount. If not you will have to build in a backer wall into you cabinet. What we do is attach cleats to each side of the opening and then fasten the backer board to the cleats.

Hope this helps.

 

[Ray LeTourneau]

Ron, if you are planning on an articulating arm, you can mount it to either side cabinet wall. Those walls are structure wood. Basically a laminated OSB. You could bolt directly through the side or use longer wood screws and go into the cabinet framing. A couple of pics are attached of ours. A different location but the same end result. When traveling I have a strap that keeps the TV in the corner. This mount style also allows very easy access for attachments.

 

[rdfagg]

Thanks Ray and Bighorn. That helps, especially Ray's idea