New switch

[Flooringit]

I am gonna be at this rv Park for awhile. It has a 50/30/20 amp at the pole. I am wanting to add a 30 plug to outside and have it run the ac in the garage that way I can run all 3 same time. I have a switch now that alternates front and back running only 2. I have the knowledge how to wire up the 30 to a panel and the panel to ac. But I have no idea if there’s a way to put in a switch to continue to run all 3 or should I just make 3 separate switches. I don’t like this toggle switch deal anyway

 

[hoefler]

Keep in mind that you may over load the pedestal. Just because the outlet is there, doesn't mean the capacity is there. Chances are there is a total of 50-60 amps available for the pedestal, which means you could pop the breaker feeding the pedestal.

 

[Flooringit]

When looking at the pedestal I noticed there was a breaker for all 3 plugs. I was thinking they would all be ran separate. From everything I’ve read 50 amp can run all 3 at same time but not start all 3 at same time.

 

[hoefler]

Yes there is a breaker for each outlet, but the feed to the pedastal has a breaker on it from the main power distribution panel, usualy a 50 or 60 amp breaker on it.