rhondacrowley
Member
I have no power to the switch going to my happy jack bunks. We have checked all fuses and breakers. Does anyone know where the power source would be located.
No power to switch for bunk beds
- Thread starter rhondacrowley
- Start date
Dahillbilly
Well-known member
Do the other switches next to or close to that switch work? I'd check connections on back of fuse panel, maybe wire came off.
rhondacrowley
Member
Yes the light switch and ac next to it work. Would the fuse still show good if a wire is off?
Dahillbilly
Well-known member
not sure I'd have to pull a wire off to see
david-steph2018
Well-known member
Rhonda, on the Happi-Jac Bed unit in our Road Warrior, the control unit is in the corner on the ceiling. The control unit is near the rear doors, in the passenger side rear corner. If one of the wires going to that unit has come loose, it will not work. It is a pain to get to it, but you will need to reach up there to make sure the wires are seated in. I was able to get mine in good and tight then after I got the bunks, I placed some duct tape around the connections to help hold in place.
So, check the wiring at the control unit.
So, check the wiring at the control unit.
