Hi all , ive desided to go with the 24k pullrite superglide 2300 hitch in my 2014 ram megacab duley on normal bed rails , my question , how much room is in front of the hitch in its installed location ? the reason i ask is i have a aux fuel tank in the front of the bed and i hope they both fit , so if you have this hitch in a 6 1/2 foot bed could you measure it for me please ?
Pullrite hitch location
- Thread starter rwdennis
- Start date
jayc
Legendary Member
I don't know what size tank you have but I know that my 100 gallon tank would not fit. I looked at a Mega-Cab when I bought my truck, it would not work. There is company that will install an 8' bed on a Mega-Cab truck but the thing would be about 30' long (LOL) and I didn't want to have to get a permit to pull my 39' Landmark.
not sure how the would help Don ? i need to know how much room is in front of the hitch , the hitch has to go where it has to go , if there is room left over for the tank great , if not im looking at a slimmer tank , the tank is 8 in deep , 22 in wide and 50 in length , other tank is only 9 in wide .im getting the hitch wed , i guess ill find out then .
WillyBill
Well-known member
Did you try the PullRite website? I bet they have dimensional drawings available to help with decision making.
WB
i called the customer support line and they said the distance from the rear edge of the bed to the front edge of the hitch is 56 inches , i have , drum roll .... 56 inches , he also said there is some tube steel at the front edge that could be cut off if need be , thanks everyone !
https://www.google.com/search?q=pul...9l4j69i60j0.6103j0j8&sourceid=chrome&ie=UTF-8
https://www.google.com/search?q=pul...9l4j69i60j0.6103j0j8&sourceid=chrome&ie=UTF-8
mlpeloquin
Well-known member
Better get that in writing. That tubing was designed in by engineers. If aomethings happens and it has been modified, well they said would not protect you.
