Ramp door seal

[bouffy52]

We have a 2011 Cyclone 3010 HD and I need to replace the ramp door seal. What is the best seal to use and where to get it

 

[david-steph2018]

We have a 2011 Cyclone 3010 HD and I need to replace the ramp door seal. What is the best seal to use and where to get it

We have not had to replace the seal on our rig it, but others have made reference to using this place for replacements for slide out seals. They may have what is needed for the rear ramp door.
www.steelerubber.com

But being a 2011 is the door a LCI made door? If so you may contact them for information on what seal.

 

[porthole]

We have a 2011 Cyclone 3010 HD and I need to replace the ramp door seal. What is the best seal to use and where to get it

When I replaced my ramp I got the weatherstrip from Steele Rubber, I emailed them a picture cross section of the seal.

The email exchange:

If you wish to send over any pictures please e-mail to Trent Poole tpoole@steelerubber.com, please give him complete information on the year, make and model.

Regards,

Cindy Dancoff
Product Specialist

Steele Rubber Products
www.steelerubber.com
P: 800-447-0849 ext 210
F: 704-483-6650



Weather strip

2 pieces x 96"
2 pieces x 90"

3/4" wide
1" tall


If it matters, this is for a 2010 Heartland Cyclone 3010 Toyhauler, with a Lippert ramp.


I can't get pictures to load anymore, so if you need a cross section shot PM.

 

[david-steph2018]

Dan just posted the catalog from Steel Rubber in the tool section yesterday. You can look thru that and see if they have the seal. At the top of the page:
Go to "Tools" then to "Heartland Owners Manuals", then select "Manufacturers Catalog" then select "Steele RV".

 

[david-steph2018]

I was checking on Challenger doors and they offer seals sold by the foot.
Seal Sold by the Foot (Between 1 and 50 Feet) Archives - Challenger Door

You could check with them if it is the same style used by Lippert.