receiver hitch??

[trail_runner]

I have a 2010 Ford F150 with a 6" lift and 36" tires and I need to pull
a 27' trail runner. problem is, I don't know where I can find a adjustable
weight distribution shank that will drop about 12" to 14". I'd like to
know if there is any place out there that sells them or do I have
to get one made??
[h=1][/h]

 

[jnbhobe]

I had one I used on a Bronco years ago that was made by Reese. I would call the manufacturer of your hitch and ask.

 

[pegmikef]

I have a 2010 Ford F150 with a 6" lift and 36" tires and I need to pull
a 27' trail runner. problem is, I don't know where I can find a adjustable
weight distribution shank that will drop about 12" to 14". I'd like to
know if there is any place out there that sells them or do I have
to get one made??

I use EAZ-Lift and their site shows bolt together shanks up to 16 inches. Go to the following site and scroll down to page eight where the shanks are spec'd.

http://www.eaz-lift.com/eazlift/products/70017_Eaz.pdf