cgaskins
Well-known member
Howdy, I noticed a couple of threads on this topic that were a little dated so I decided to start another one....
I have a 2015 Big Country 3650RL - which we absolutely love! I hate the tin covered lugnuts. I have a couple that have cracked and I want to replace all 32 of my lugnuts. They are 9/16 -18. I went to a couple of parts stores this morning and didn't like what I found except at NAPA. Their part number 641-4274 is a very beefy and sturdy lugnut. https://www.napaonline.com/en/p/NDP6414274?keywordInput=6414274
Well it is a little different from the ones I currently have on my wheels. The difference is the length and the angle of the head where it seats into the wheel and the length.
So here is a comparison of the two:
Th wheel stud extends out 0.649 past my wheel so I have plenty of room in the NAPA lugnut to accommodate the length of the stud. The NAP lugnut also fits the diameter of the hole in the wheel which is 1.30.
Any issues you guys see with running with these lugnuts? If there are better alternatives, please let me know.
Note in the attached photos the OEM lugnut is on the left and the NAPA lugnut is on the right.
Thanks,
Chris
I have a 2015 Big Country 3650RL - which we absolutely love! I hate the tin covered lugnuts. I have a couple that have cracked and I want to replace all 32 of my lugnuts. They are 9/16 -18. I went to a couple of parts stores this morning and didn't like what I found except at NAPA. Their part number 641-4274 is a very beefy and sturdy lugnut. https://www.napaonline.com/en/p/NDP6414274?keywordInput=6414274
Well it is a little different from the ones I currently have on my wheels. The difference is the length and the angle of the head where it seats into the wheel and the length.
So here is a comparison of the two:
Original Lugnug | NAPA Lugnut | |
Internal Thread Depth: | 1.80 | 1.61 |
Width (widest part) | 1.03 | 1.17 |
Deepest scaring on tip after a full torque seeting | .89 | .93 |
Th wheel stud extends out 0.649 past my wheel so I have plenty of room in the NAPA lugnut to accommodate the length of the stud. The NAP lugnut also fits the diameter of the hole in the wheel which is 1.30.
Any issues you guys see with running with these lugnuts? If there are better alternatives, please let me know.
Note in the attached photos the OEM lugnut is on the left and the NAPA lugnut is on the right.
Thanks,
Chris