Justin_92_92
Member
Hello, on my 2017 Mallard M29 I had to do some roof work. A tree branch had fallen on it and did some good damage. I am putting a new rubber roof on as well as replacing some sheeting that was compromised. I decided to go over the old sheeting to keep the strength and because it was not easy to peel the old up.
My issue is I have a spot about 2ft in circumference that is lower than it w
Should be. It is due to the foam being compressed under it. Can anyone recommend something to level this? I was thinking wood filler or tiger hair or something on that lines if possible. Thank you!
Justin
Sent from my SM-N950U using Tapatalk
My issue is I have a spot about 2ft in circumference that is lower than it w
Should be. It is due to the foam being compressed under it. Can anyone recommend something to level this? I was thinking wood filler or tiger hair or something on that lines if possible. Thank you!
Justin
Sent from my SM-N950U using Tapatalk