ihsolutions
Well-known member
My 2011 Bighorn is one of the few that has the Lippert Sewer Boom. I know a lot of us that one have since removed it -- I do agree it is not without it's engineering shortcomings.
In the past, we have stayed predominately at campgrounds with electric hookups only, meaning that we must use a dump station when we leave. The sewer boom system is great for this. Remove the cap, pull out a few feet of hose, and drop into the hole. It is a one-handed operation for me, from start to finish. Simple, clean, and no hooking up hoses to fittings.
As time moves on we are starting to stay at places with full hookups, during which time the limitations of the sewer boom become apparent:
1. Cannot store enough hose (20' MAX), which was not nearly enough at the Goshen rally, and
2. Due to the way the boom is positioned in front of the sewer hose connection, directing the hose to a waste hole behind the boom is problematic. Anyone who has done this knows what I mean. Your 20' hose quickly becomes useful for only about 10'
Since we do this mix of camping with hookups and without, I'd like to keep the boom, but find a way to take additional hose (perhaps in a 4" PVC secured underneath) so that I can experience "the best of both worlds", if you will.
Ideally, I'm looking for a way to disconnect the fitting from the sewer boom, and connect my Rhinoflex hose (from the PVC storage) quickly and easily, when we reach sites with full hookups. Doing so right now, as it stands, you have to pull all the hose out of the sewer boom, so that you can remove the corrugated black plastic cover that runs from the sewer outlet to the boom itself.
I realize I've asked a confusing question without probably doing a good job of explaining what it is I'm trying to do, but has anyone figured out a way to keep their sewer boom, yet find a way to work around the limitations of it?
In the past, we have stayed predominately at campgrounds with electric hookups only, meaning that we must use a dump station when we leave. The sewer boom system is great for this. Remove the cap, pull out a few feet of hose, and drop into the hole. It is a one-handed operation for me, from start to finish. Simple, clean, and no hooking up hoses to fittings.
As time moves on we are starting to stay at places with full hookups, during which time the limitations of the sewer boom become apparent:
1. Cannot store enough hose (20' MAX), which was not nearly enough at the Goshen rally, and
2. Due to the way the boom is positioned in front of the sewer hose connection, directing the hose to a waste hole behind the boom is problematic. Anyone who has done this knows what I mean. Your 20' hose quickly becomes useful for only about 10'
Since we do this mix of camping with hookups and without, I'd like to keep the boom, but find a way to take additional hose (perhaps in a 4" PVC secured underneath) so that I can experience "the best of both worlds", if you will.
Ideally, I'm looking for a way to disconnect the fitting from the sewer boom, and connect my Rhinoflex hose (from the PVC storage) quickly and easily, when we reach sites with full hookups. Doing so right now, as it stands, you have to pull all the hose out of the sewer boom, so that you can remove the corrugated black plastic cover that runs from the sewer outlet to the boom itself.
I realize I've asked a confusing question without probably doing a good job of explaining what it is I'm trying to do, but has anyone figured out a way to keep their sewer boom, yet find a way to work around the limitations of it?