Warning To New Bh Owners! Read!

[svd]

Very carefully! Facing the closet, I removed the right panel, using a 2" wide putty knife. I first slid it under the trim, removed that, and then under the panel itself. It was all held together with small brads, and staples. Once the panel was removed, I was able to reach in and tighten the connections on the vacuum breaker. That seemed to fix the leak. Let me know if you need more info.

 

[Uncle Rog]

Thanks, I was hoping to be able to pull the back also to be able to get at the converter, it must be back there too. The factory thinks it is a 9100 series IP, however most posts indicate a 9200 is used as a rule......

 

[svd]

In my unit, you can get to the convertor much easier thru the storage area. Once you open the storage door, the panel to your immediate left can be removed (3 or 4 screws), and you will find the convertor behind there.