What did you do to your camper today?
- Thread starter MagnoliaTom
- Start date
travelin2
Pennsylvania Chapter Leaders-retired
Bones
Well-known member
Nice. You'll notice the difference right away!!!
Thanks. There was a huge difference in weight. I took some time to pump some grease into the axles as well
coram8
Active Member
Nice! I did the same thing (G614s though) last week. The slide toppers look great also. Did you order those with the Gateway new, or have them done afterwards?
Chippendale
Well-known member
My son is working year around at the resort in Jackson Hole, WY so I will probably be through Colorado sometime this summer on my way up to visit him. At first I was thinking about making the rally in Albuquerque and then going up to Buena Vista for that one, and then going on to Jackson, but since I have to be in Austin for an appointment on June 7[SUP]th[/SUP], I can’t seem to make that work, too much driving. Going up there and then back and then back up there again.
- - - Updated - - -
Nice. You'll notice the difference right away
Yeah, the peace of mind knowing you are not towing a blowout down the road looking for a place to happen.
Bones
Well-known member
The toppers were ordered from the factory but didn't make production and were put on at the dealer. I'm glad we ordered them.
For20hunter
Pacific Region Directors-Retired
I cut off my old 1 1/4" receiver hitch off of our Landmark and a buddy and I installed a 2" receiver with a flag pole mount on each side for my flag pole.
Rod
Rod
Shortest Straw
Caught In A Mosh
Sent from my PU-36 Explosive Space Modulator.
JWalker
Northeast Region Director-Retired
travelin2
Pennsylvania Chapter Leaders-retired
I used mine to burn brush...
Technically it isn't to the camper, but an accessory of the camper.
I built a EU Quiet Box for our EU2000i.
See and hear on my Flicker account. For some reason it won't play on Google Chrome(but will in "incognito" window), but will play on Mozilla Firefox and MS Internet Explorer.
EU2000i au naturale.
http://www.flickr.com/photos/11322575@N07/26138226090/in/dateposted-family/
EU2000i in Quiet Box
http://www.flickr.com/photos/11322575@N07/26344709241/in/dateposted-family/
I built a EU Quiet Box for our EU2000i.
See and hear on my Flicker account. For some reason it won't play on Google Chrome(but will in "incognito" window), but will play on Mozilla Firefox and MS Internet Explorer.
EU2000i au naturale.
http://www.flickr.com/photos/11322575@N07/26138226090/in/dateposted-family/
EU2000i in Quiet Box
http://www.flickr.com/photos/11322575@N07/26344709241/in/dateposted-family/
TravelTiger
Founding Texas-West Chapter Leaders-Retired
Where did you get your handle, and the cost? I want one!
Also, would love to see a pic of it folded against the coach!
ram_1955
Well-known member
Rail is made by Stromberg Carlson. This is the model AC-544. I ordered it direct form Stromberg I just checked there web site and it is $179.95 not sure on shipping. It will be tomorrow evening before I can get a picture of it folded in.
only thing I have found is that it will not fold over the door it must be folded against the side away from the door.
i added a steel plate on the inside and bolted all the way through the wall.
http://www.strombergcarlson.com/rv-hand-rails/commercial-rails/
only thing I have found is that it will not fold over the door it must be folded against the side away from the door.
i added a steel plate on the inside and bolted all the way through the wall.
http://www.strombergcarlson.com/rv-hand-rails/commercial-rails/
JohnD
Moved on to the next thing...
Sent from my PU-36 Explosive Space Modulator.
Is that a truck wash?
And where?
I've been wanting to clean up the Prowler before we hit the road for the Colorado HOC in four weeks!
TravelTiger
Founding Texas-West Chapter Leaders-Retired
Thanks for the info!
farside291
Well-known member
Installed a Spledide stack kit on my LG washer/dryer combo unit. The DW finally got tired of ironing everything that comes out of the ventless combo. I bought a Splendide vented dryer to mount on the top. I took the top of the LG washer/dryer off to make sure I wouldn't hit anything. Sure enough, all clear. Using the template provided with the stack kit I positioned the rear bracket and ran in the screws. The screws provided didn't even go all the way through the top, perfect. I took the top and put on the ground and placed the dryer on the top with the rear bracket catching on the back of the dryer and positioned the front bracket so its up against the front of the dryer and marked it and then screwed it down. Now if the rain ever quits I will drill that hole for the dryer vent. DW can't wait to have a"real" dryer. Oh, LG does not recommend stacking a dryer on top of any of their combo units. I guess time will tell.
superduty08
Tennessee Chapter Leaders
Had the Titan disk brakes installed today. Great service by Ron Russell's techs John Alinger and his son. Can't wait to get on the road to Serveirville Tuesday.
JohnD
Moved on to the next thing...
Was going to start getting the Prowler ready for the Colorado HOC Rally in Buena Vista, CO that starts four weeks from today, but since we now have a pretty good snow storm heading this way I put all the slides in so that they don't get all covered in snow!
Oh well, . . . we are supposed to be in the 80's next Thursday and Friday (my days off) . . . so I guess I'll get started on the Prowler then.
Tomorrow I need to call the dealership to see when they are coming down to finish the warranty repairs.
Oh well, . . . we are supposed to be in the 80's next Thursday and Friday (my days off) . . . so I guess I'll get started on the Prowler then.
Tomorrow I need to call the dealership to see when they are coming down to finish the warranty repairs.
Similar threads
