PDA

View Full Version : And its "home"...well sort of :).



SCPOBob
10-15-2012, 10:45 AM
Well we are officially members of the Heartland/Cyclone family now, picked up our 300C on Saturday and placed it into our storage space yeseterday. All moved in nearly everything is in place (need to work on some A/V stuff in the living area) and get the garage ready for the Bike (working on pics, upload tool is fighting with me). Questions: The bedroom TV mount (only the mount is present, no TV), there is only the wall mount and no clue as to what the TV side looks like...does anyone have an idea as to the manufacturer and model number? Also has anyone looked at (or already done this) adding a 110v outlet inside the cabinet above the power panel, but below the main control panel?

SCPOBob
10-15-2012, 10:48 AM
Okay, got the file upload to work...evidently it doesn't like IE 10.21675

cookie
10-15-2012, 10:53 AM
Nice looking rig.
You might want to consider adding some air bags to level out the truck. Once you do that check how level the trailer sits.
As far as adding a 120 receptical, I have done that.
I added an entirely new 20 amp circuit.
I bought a 20 amp breaker, ran some 12 guage Romex, installed two boxes, one GFI and another receptical protected by the GFI.
If you dont have room for another breaker in the service panel, you can get a duplex breaker that allows for two circuits in one slot.
I installed the two recepticals in the face of the lower kitchen cabinet.

Peace
Dave

Noobie
10-15-2012, 12:01 PM
She's a beaut enjoy!

SCPOBob
10-15-2012, 12:08 PM
yup...already looking at airbags, although it is riding pretty good (clearing the axle bumpers with by a couple of inches) as it sits and is nearly level. Good idea on the dual breaker, I will check that out this weekend as I start my first round of modifications...adding shelves to the cabinet just inside the door, the top shelf is already reserved for the X-Box used for movies/music (as well as gaming when the weather is less than ideal out).

Ray LeTourneau
10-15-2012, 09:34 PM
Questions: The bedroom TV mount (only the mount is present, no TV), there is only the wall mount and no clue as to what the TV side looks like...does anyone have an idea as to the manufacturer and model number?
Bob, all flat panel TV's have a standard mounting pattern. Larger units have two sizes. As long as the TV fits into the opening, it will work with the mount. You may need to buy 4 metric screws though.
Hopefully this was the info you were looking for.

SCPOBob
10-16-2012, 10:55 AM
So in doing a little web-research the wall mount appears to be similar to the MorRyde TV5-*** mounts (specifically the TV5-002 or 003). It would be great if someone from the factory could chime in with confirmation or not...here is the link to the product - http://www.tvformyrv.com/product/TV5-002-tilting-rv-tv-wall-mount