The DW had asked several times so I decided to switch out the standard size microwave for a nice GE Profile microwave/ convection oven in our Cyclone. Was in the process of removing the old unit by removing the two top fasteners and realized that 1) both of the fasteners were seriously loose. 2) When HL installed the microwave, they installed the top right fastener into to hole of the unit with no filler block in the cabinet. They didn't even have a drilled hole for the far right hole which should have been used ( which would of had filler block). The damage to the counter; oven and microwave could of been ugly if the left fastener would of came completely loose because the right fastener wasn't going to support anything with the way it was installed. As easy as it is the check these fasteners, I would recommend to all that you check these top fasteners to ensure your unit is secured properly.
Sent from my DROID BIONIC
Sent from my DROID BIONIC