View Full Version : Add E/Track to Toybox

12-03-2013, 05:37 PM
We have a TQ325SS which has the second restroom in the Toybox. We are wanting to add E/Track to our Toybox since we have a bunch of dirt bikes and need more tie downs. Does anyone know of anything in the floor that we could damage adding this track?

12-03-2013, 09:40 PM
Your best bet would be to call HL customer service and have your vin handy. They have the ability to see how your unit was built and can tell you what might be under the flooring or how thick the flooring is.

The number is: 877-262-8032

Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

12-04-2013, 10:25 AM
Get a creeper and roll around underneath. If you have a fuel cell you will obviously have to be aware of that and depending on where you want the track you may have to drop one end of the tank to get your hands in..
There should be 5 steel cross members under the floor, they are in line with the tie downs you already have.

Here is an example of some added track.
There are 3 lengths going front to rear and two from side to side (one is hard to see and is by the ramp)


12-04-2013, 11:11 AM
Also.....Before bolting the E-Track down you may want to mark the location with chalk lines and sand/grind down the diamond-plate pattern on the black mat. This will make it much easier to install and remove fittings from the track once installed.