So I think I got this figured out - I’m now looking to see if my train of thought is correct. I have the Landmark with three air conditioners. The far left and far right have heat pumps on them. So far- so good. The middle A/C was an option, it does NOT have a heat pump. OK-no big deal, but you can’t run the front heat pump AND the furnace at the same time! You can only select either the heat pump or the furnace - not both. The furnace and heat pump are on the same thermostat.
So my next project will be to wire in the furnace into the middle thermostat, (controller for the middle A/C), so I can run the heat pump on one thermostat AND furnace on the other thermostat at the same time.
Am I on the right track here?
So my next project will be to wire in the furnace into the middle thermostat, (controller for the middle A/C), so I can run the heat pump on one thermostat AND furnace on the other thermostat at the same time.
Am I on the right track here?