PDA

View Full Version : RV lock quit



Niles
01-03-2019, 03:24 PM
I have a RVLOCK model #RVLv4.0, it was slow to unlock so I changed batteries and now it won’t do anything. Before someone says check batteries, I did and replaced again still nothing and the first batteries were ok too. Not sure where to go from here, checked for corrosion little bit so cleaned that and still nothing. Suggestions, please!

travelin2
01-03-2019, 03:34 PM
May have to perform the setup to “re-learn” your code.
Had to do so with their v3.0 before we upgraded to the 4.0


Sent from my iPhone using Tapatalk

danemayer
01-03-2019, 05:18 PM
You may have accidentally hit one of the switches next to the batteries. One switch disables operation.

jbeletti
01-03-2019, 05:41 PM
Niles - to confirm, the lock "is" working but it operates (unlocks) "slow"? It that right?

Also - consider a quick call to RVLock at (888) 316-9899.

JWalker
01-03-2019, 07:06 PM
There are also several YouTube videos that help reprogram or troubleshoot RVlock issues.

Niles
01-03-2019, 09:03 PM
Before I replaced batteries it was real slow but now it does nothing at all no beeps chimes nothing. Will try calling tomorrow.

Niles
01-07-2019, 05:37 PM
Update on lock, called RVLock and they said i have a bad circuit board. So i had them ship me a whole new back with the circuit board in it, along with a circuit board for the keypad, which they recommended. Got it and got two circuit boards for the back, no keypad board. Called the nice people at RVLock again, told them it still is not running the motor to lock it, however we have beeps and chimes now. they said I need the keypad circuit board. Asked what I was shipped and she said whoops, so they are sending me the right part and I have a spare for the back. So far other than the mistake about sending the wrong circuit board I,m happy with their service. Still waiting to see if the keypad one fixes it.

jbeletti
01-07-2019, 06:51 PM
Niles - you're going to be a pro at removing and installing these locks. To confirm, you "will" need to remove the lock to replace the keypad. Several tiny screws on the back of it.