Recent content by alex00

Yup same guy probably wrote my labels as everyone else's. My washer/dryer circuit and converter circuit were switched. So were the microwave and vacuum. When I rewired I just found which outlet was on which circuit and used a label maker. It's worth tracking each circuit down and labeling them...

Mine was wired to run living room always and switch between bedroom and garage. Since the kids sleep back there I took the time to wire the switch out of the equation. It was incredible simple to do by adding a new circuit breaker and running a few feet of wire to the switch. I put off doing...

I knew I wanted to get new tires for my Cyclone before I even ordered it. I crossed my fingers and held my breath for a few trips. Whether the impending explosion of my towmax tires was a real or perceived risk, I nonetheless travelled with anxiety. The kind folks at America's Tire relieved my...

When I was shopping AJ was very helpful both on the phone and over email. There used to be an option list floating around but I'm sure it's changed from 14 when I bought. Although the factory won't really do major floor plan changes on a custom basis I have read they will do some mods. One...

Good luck on the test. I was nervous, but try to relax. They did not get in my cab for the pre trip but do ride in the cab during the road test. I have no idea if they will make you come back if they see it. I wouldn't say anything, and see what happens. Maybe you put a photo of your favorite...

The West Sacramento office seems a little quirkier than what others described. They will make you back the offset backing course even though there is no description in the RV license manual. They also pretend there's a wall extending out of the 90* backing that you cannot cross. They will also...

On my slider there is a strip of plastic surrounding the frame on the "outside" or garage side. When I remove the plastic trim it reveals the screws used to hold the frame in place. With the screws removed the frame should slide into the garage. Hopefully that makes sense. Sent from my iPad...

I was torn shopping. I looked at the teryx because it had 4 seats and was short enough. But I kept getting drawn back to the RZR. I'm just glad it works. You should have seen me with a tape measure and a straight edge at the dealer trying every imaginable way to visualize it fitting. Sent...

My advice would be get the floor plan that suits your needs, and a length that gets you into the spots you want. I would personally not let double or triple axles weigh in my decision. Outside of tire replacement cost, I have not found anything that different from the double axle trailers I...

I bought the Cyclone 4000 and had no intentions of getting a side by side. As things change I decided to get a RZR and wanted a 4 seater. The 4 seat 1000 specs out at 12'2" while my garage is 11'6". My 4000 has the sliding glass door offset to the door side. The door and glass panel come off...

It's fixed. What a silly mistake. I ordered a new led strip on Amazon for $11 and it looks identical to the oem. I just had to solder the original plug in place. Thankfully it was a very easy fix. I'm sure I won't soon forget what switch does what. Sent from my iPad using Tapatalk

He's, my lights wade in the roller. Can't see them until the awning is completely unfurled. One tiny little hole that I have to squint to see. It's right by the roller so I'm not too worried about it. Im just bummed I made the mistake and now need to fix it. Carefree list the strip light at...

Well found some good news and bad news. The good news is that the switch for this light was in the front cabinet, not the garage. The light works fine. The bad news is the switch I thought was for the light actually turned on the led awning light. Somehow that switch stayed on burning out my led...

I just did this mod two weeks ago. Hopefully not hijacking this thread too much. In the cyclone it was very easy. Pull your circuit breaker main box out of the hole. Remove the switch to select the air conditioner. Using fish tape run 12/2 romex from the switch box to the hole for your circuit...

I'll pull my fuse panel for loose wiring but there is power at the switch. I'm thinking its a ground or wiring issue. I was wary of pulling too much apart at the light. I'll pop it apart again and see how far back I can trace the wires. I couldn't see obvious mounting screws though. Sent...