Search results

Both of mine are in the breaker box just inside the door, one labeled front A/C and the other Rear A/C

The only thing I can think of to try is to unplug the oven from the power and plug it back in . Kind of like rebooting a computer. Try it and see, just might straighten it out.

Sure Wish I could make the rally with you guys but I am already 19 days late for my position in Montana. I enjoyed the lunch with you and your better half today and hope you get all the problems with your home taken care of soon. Don

Well folks we got the new suspension under the trailer and and most of the problems seem to have corrected themselves including the cracks in the side walls that I don't believe have been mentioned yet. These cracks developed in the side walls as we pulled it to the repair shop to have the axles...

Well everyone take a break, The axles are here but the mobile RV Service that was to do the disassembly has his week planed out and will not be able to get started untill Monday. So I have five more beautifull says in Las Cruces NM. Kakampers I had Mor Ryde suspention on the trailer and the...

The Axles that have been ordered are from Dexter and yes they are heavier axles and heavier springs. The springs as I read the estimate are seven leaf springs with 4,000 lbs. weight limit.

Glad to see the unit at home and hope all repairs are made to your satisfaction. Now get out there and have fun.

Update, I was contacted yesterday by the repair facility and told that the axles would be in today around 1:00 pm today. I expect the trailer to go in on Wednesday to start disassembly and repair. As soon as it is disassembled I will take pictures and send to Heartland but for now we have made...

Well the problem turned out to be a loose neutral in the breaker box. Camping world found it when they jiggled the wires in there and the power returned.

kakampers, the pin box has pushed about 1/2" up into the fiberglass, even when unhitched. Part of the beauty molding is now hanging loose while the screw remains in the fiberglass above. I noticed the pin box needed caulking a couple of weeks before our last move and re-caulked it. Within...

kakampers, from my original post "The estimates to repair the suspension and the pin box (they won’t know the full extent there until the get the front cap off and the closet floor out) are currently over $6000.00." They are, of course, estimating this on like jobs from the past. They can...

lhetsler, I am not sure that your post was meant for me or not but what brought my attention to the pin box on my trailer was the front of the pin box angeling upward and the molding around the pin box being lifted upward with one of the screws having pulled through th molding placed around the...

Well we are still here in Las Cruces waiting to here from the repair facility on when to take the trailer in and get started on the repairs. Thanks to all who have shown support for us in this matter. We will pay the repair bill when the work is finished. We ended up in this situation because...

Well it looks like if we ever plan on getting out of New Mexico we have to do it on our own. Called the bank today and made arrangements to borrow the money to have the frame and axles repaired. The longer we wait the more we loose from loss of work.

Good luck Creeper, hope it all works out soon. Could be like mine where Lippert washed their hands of my claim on the frame. We made a loan of $7,000.00 today to repair the frame so we can get back on the road.

Creeper, if you are still reading this post it took a while but who could help but smile :) looking at that avatar of yours. Thanks for your attempt at a little humor especially since I know you have been going through some trials of your own. Hope all turns out well with your problems.

Got a call from Heartland who informed me that Lippert had washed their hands of any responsibility in this matter. Seems that the trailer was manufactured in October of 2006 and at the time of manufacture Lippert warrantied their frame for two years from date of manufacture. Having bought the...

For those of you that are interested I received a call this morning from Heartland And they have taken an interest in what is going on here in Las Cruces. It is more relief than you can imagine to know that I am not alone in this. Thanks to this forum and the factory participation in it. Maybe...

Hi Tate, so very good to hear from you. Unfortunately most of the contacts to date have been by phone but maybe e-mail would be the way to go from here out. Both parties here that are involved in doing the work refuse to work for lippert as they have been burned before on warranty work...

Got way too much money in this Landmark to think about trading it in on anything after only 21 months and six thousand miles of towing. We tried to find a trailer that we would be comfortable in for the rest of our years but maybe we we went too large. We are in our sixties and now working for...

Creeper it didn't work :( surely your not advocating that my dream of fulltiming is not for me.

Stuck in Las Cruces It’s only Wednesday and already it’s been a long week! We left Van Horn, TX on Thursday and towed to Camping World in Anthony, TX for a Friday appointment to have the door side wheel bearings checked as well as the springs on the off door side (trailer was riding 3 3/4" low...

We have used most any single ply tissue for almost two years with no problems. We do also use the 5 Star Happy Camper chemical in our black tank and have never seen any solids coming out of the black tank when I dump it. We even use single ply Charmin at times with no problems. We highly...

Yes Lefty I turned all the circuit breakers off then back on several times as I am aware of what you are saying. The only thing I can think of is that the GFI at the lavatory controls these plugs and is not passing on the currant even though it is hot and is not tripped. The GFI looks good and...

I have a Classic Landmark Mt. Rushmore and all the electrical outlets on the front wall of the coach are dead, this includes the one in the front side of the bedroom slide, the one in the closet, one above the dresser on front wall and the one in the bedroom cubby hole where the tv plugs in. I...

A couple of weeks ago the fireplace in our Landmark quit heating. I removed the fireplace and discovered that the fan was not working and the electric element then overheated and shut down so I turned the fan blade by hand and found the blade tried to turn but had too much resistance to keep...

Kenny the ice maker in our Landmark only makes three to four batches a day and the freezer will only cool down to 20 degrees with it set on the coldest temperature. Heartland had dometic rep check it and he verified that there were no obstructions in the vent and that the fans were working then...

We have a 13,500 btu unit in the bedroom and use both during the daytime. At night we turn off the bedroom unit as it makes much more noise than the ducted living room unit and we have trouble sleeping with the bedroom unit running. It wakes us up every time it cycles on. At night the one...

Our 08 Landmark Mt. Rushmore also had the hot and cold water manifold in the docking station. Like Tom said that is one of the reasons we we jumped and bought our Classic Landmark before they all disappeared. We like this feature very much and don't understand why it was dropped other than...

I understand your problem itsbeertime. Unfortunately with a 2500 you are at the limits. I think you as well as I know the only solution to this problem. I know you see lots of 2500 models towing trailers bigger than yours and I do as well and we both know they are most likely overloaded. I am...

To find the true weight of the trailer the truck has to be loaded the same way when it is weighed with and without the trailer. This doesn't seem to be the case as you state that the truck was weighed with full fuel and the GCVW weight with the trailer and truck the truck was mostly full so the...

I leave mine in drive with tow haul engauged and only take it out of overdrive when in the mountains in a hard pull. Don

I simply leave the gray valves open and they drain as I use them. When the stool starts to burp when I flush it's time to drain the black tank. Of corse when traveling I just dump the grays every couple of days Don

Lefty the bottom of ths slide did not blow in, only the top and there is nothing to hold them in place. The winds were gusting to 75 mph. I had thought about something like the load locks but dear wife thinks that it might break the facing on the slides and I can not say for sure that she is...

We have had the same problem with the oven in the last two trailers we have owned, finally got it fixed in the first trailer but have never gotten the one in the Landmark to stay lit. It will burn long enough to get the oven started and so far will stay lit until we are through baking but after...

Brogie they come with a hinged door that stays closed as long as the vent fan is not operating and those little hinges that you move locks the door down for travel and the door will blow off if you don't lock it down. Don 't ask me how I know. Don

The digital I bought at Wally World can be set to a 1 degree span so it comes on one degree below the set temp but after mine cuts off it runs a few minutes to cool down so it reaches about two degrees above the set temp. Don

Hi Jim, if your travels take you anywhere near Van Horn Texas stop in the Van Horn KOA and say hi!!!

Got to have mud flaps for front and rear. Big ones for the rear that are extra long with chrome weights at the bottom, don't want to be throwing rocks at your trailer. Don

We lost the door in our vent, it was my fault as I did not lock it down for travel but it is so high on the trailer that you have to drag out a ladder to reach it. After loosing the door while here in Texas where the winds blow nearly all the time we kept getting dust and sand blowing in...