Search results

Wouldn’t a stud finder work? Sent from my iPad using Tapatalk

Then you could use either the Dometic 310 or 320. They’re both the same height, 320 is elongated bowl. Sent from my iPad using Tapatalk

Measure from the wall to center of toilet bolts, as in picture. This is your roughin. You can get a new toilet with your roughin distance or less but not more. Sent from my iPad using Tapatalk

Get another solar guy. It is indeed possible to do what you want. You will need more parts than just the solar panels though. Sent from my iPad using Tapatalk

Sometimes they’re called handicap toilet seat. https://www.amazon.com/HealthSmart-Portable-Elevated-Raised-Standard/dp/B08P4WM3B6/ref=sr_1_5?crid=1LU7LPSP92MSR&keywords=Handicap+toilet+seat&qid=1689294229&sprefix=handicap+toilet+seat%2Caps%2C161&sr=8-5 Sent from my iPad using Tapatalk

Why not just get a raised toilet seat? Sent from my iPad using Tapatalk

New hangers! With that rust they’ve been broken for awhile. Check the others. Sent from my iPad using Tapatalk

Yes you can, if it’s a 50 amp service Sent from my iPad using Tapatalk

What’s the purpose of those rubber pieces attached at the front of the IS. Sent from my iPad using Tapatalk

Sorry, not the same as mine. Sent from my iPad using Tapatalk

Bighorns don’t have bbq connection. Doubt if Big Country has one. I installed my own Sent from my iPad using Tapatalk

What’s the manufacture name on front of microwave. I have a 2016 Bighorn and it may be same model. If so I can give you model number. Not sure you can count on Heartland putting same microwave in all 2015 models. Sent from my iPad using Tapatalk

If you have your drain hose permanently connected to the holding tank, the black tank valve may be leaking causing the thin liquid to drain off. Causing oatmeal. Sent from my iPad using Tapatalk

Did the hot cartridge come out of the valve? If so the bonnet nut was not screwed down and the cartridge blew out. High pressure should not cause the the hot cartridge to blow out unless something else is wrong. Sent from my iPad using Tapatalk

I agree. If it’s not factory, that’s a really good install. Even the edge of the frame has wood grain on it (assuming that’s not solid wood). The panel below looks like my DC fuse panel. Those breakers are 15 amp not 20 amp and they’re not tied together so I don’t think 240v like Cheap Heat...

Unfortunately most people don’t research dealers before buying. And I don’t know of a way to inform people before they buy if they don’t research. Not sure if I’ve ever seen a post where they are happy with CW. My take, CW is interested in new business, not repeat business. Sent from my iPad...

Take it to a RV repair business Sent from my iPad using Tapatalk

You do not need to turn off converter. The converter does nothing unless it’s plugged into shore power. Your solar does not go through converter (converter has nothing to do with solar charging). Sent from my iPad using Tapatalk

I’d just bend it back in. I think it just covers the cables. Get some Eternabond tape to repair the slide roof. Sent from my iPad using Tapatalk

Doesn’t make sense to my simple mind. Solar is DC, converter is AC in then converts it to DC out to charge batteries and run DC loads. Your solar shouldn’t go through converter. What you don’t want to do is have your inverter supply AC power to panel and go to converter to charge batteries. It’s...

Nice! Wish that would work for my 10’ fly rods. [emoji30] Sent from my iPad using Tapatalk

Same here, since 2015. Cut off orange strap (pretty soon it’ll just get greasy). Doesn’t rust either. Sent from my iPad using Tapatalk

Inverter as close to batteries as possible as others have said. I needed to use 4/0 welding cable between batteries and inverter if distance was less than 5’, according to inverter mfg. jleavitt11 idea is good and you wouldn’t have to do anything to breaker panel. I did it different but both...

I like your organization. Impressed you even mitered your access frames. Sent from my iPad using Tapatalk

How we do it in the plumbing trade. If it’s in a driveway, sewer access is around 5” below finished concrete slab. The sewer pipe is surrounded with sand, not native soil or concrete. Place a concrete box around pipe set to level of finished slab. Put a cast iron cover on box, not concrete...

Same thing happened to me on my Bighorn. Replaced with this: https://www.homedepot.com/p/ANTOINE-17-7-in-Indoor-Farmhouse-Black-Caged-Small-Ceiling-Fan-with-Lights-and-Remote-Control-FS6602-4/318539625 Bonus, fan works much much better because it’s not so close to ceiling. Sent from my...

Does your inverter output go to a sub panel? How did you get power to your inverter if you didn’t get into the back of your house panel? I’m assuming, with these questions, that your Magnum has a built in transfer switch. Sent from my iPad using Tapatalk

Guess you know black is a lot easier to find. Here’s the D-Seal in white. SoCiMa White Rubber 018-312-EKD for 1 x 15/16 inch x 35' D-Seal RV Slide Out System https://a.co/d/4ZIhG1g Sent from my iPhone using Tapatalk

Look a lot like a 1159 bulb like this link below. Push and turn. The one that’s distorted from pliers may be hard to remove https://www.amazon.com/CEC-Industries-Bulbs-20-48-BA15s/dp/B00JNFCDWG Sent from my iPad using Tapatalk

https://www.magnum-dimensions.com/product-inverter/2800w-12vdc-pure-sine-inverter-charger-ms-series Expensive but it has everything, including transfer switch. Sent from my iPad using Tapatalk

The thermocouple, when the pilot light hits it, creates a millivolt current to hold open the electromagnet. If there is no millivolt current the electromagnet is held closed by a spring. With the electromagnet open gas can flow though, when closed no gas. The thermocouple is screwed into the...

If you put a temporary exit valve on, be sure you keep your grey tank valves closed until you open the exit valve to drain the black tank. You don’t want to have your black tank back up into your grey tanked. The cable secures to the black tank valve with a set screw. It’s very common to cut a...

I made a repair on a grey tank, that BigFry linked to above, using plastic welding sticks. 2 1/2 years later it’s still holding. Sent from my iPad using Tapatalk

Are you saying you don’t have any keys for the door? If you have a key, take it to a locksmith/key shop. They can make one for you from your existing key. If you don’t have a key, and the trailer is unlocked, remove lock and take it to a locksmith. They may be able to rekey it for you. If...

When our trailer was a couple of years old I turned on the fireplace and immediately got a electrical burning smell. I discovered the blower was not operating when the heating element kicked on. Called the manufacturer who sent me a new blower heating element assembly, under warranty. Because...

Motor and gear. Had to replace mine once...

Just asking, cause I don’t know. Would the Wago connectors be a better/good option. Sent from my iPad using Tapatalk

If you can get your freezer down to 0°, which is hard to do, you’ll probably be freezing some stuff in your refrigerator. Getting it to 0° is possible when it’s cold outside (like in the 50s). When it’s hot, no way. Everything in our freezer (Norcold 2018, or is it 2118) stays frozen except ice...

I’m sorry to say, you’re better off cutting out and replacing the fitting. Anything else is a bandage. That is a low heel fitting that’s used quite often in venting a residential toilet. It’s actually in the wrong orientations in the horizontal position but it works for this. Sent from my...

If you go with the Dometic 310 it should be the same roughin, 10”, as the Thetford. If you go with the Dometic 320, elongated toilet, it’s a 11” roughin. May not fit without some waste line moving below toilet. Measure from toilet bolts to wall. This is your roughin distance. Sent from my...