Search results

Thank you! That's a bummer. I found the "install and users" manual for the thermostat we have, but it doesn't actually detail how to install it (basically, no references to wiring or other external control boxes). I need to go out to see what the A/C models are I suppose. Perhaps the wiring...

Thanks for info. I'll pull the thermostats back before buying a residential thermostat to see how many wires there are. My old weekend Warrior had a Dometic A/C and the only thing we could control was whether the A/C or fan was on high or low. We set it to run on high. Edit: The current t-stats...

I bought a set of Sailun tires for my rig from simple tire via Amazon in July 2019 and they were all manufactured the first quarter of 2019 if my memory serves me correctly. They were shipped from national tire warehouse, two different locations. Sent from my SM-G955U1 using Tapatalk

Out of curiosity, you say it is turning on, but is it cycling? It seems like mine will turn on and blow cold air when it runs out of propane. It doesn't stay on too long though, maybe a minute or two, if that. When I think I should have plenty of propane left, I overlooked that as being a...

Why not just install a home style thermostat? I installed one like the $20 Honeywell 5/2 day programmable thermostat in my old 2008 Weekend Warrior (which worked really well!) and am contemplating on replacing both the thermostats in my 2014 Heartland with a similar one. Any reason why...

Glad you got it figured out! Sent from my SM-G955U1 using Tapatalk

Re: onan remote panel wiring? starter wont stay engaged from NEW remote switch... What model is it? HGJAA, HGJAB, etc? Sounds like to me it's a ground issue somewhere. Sent from my SM-G955U1 using Tapatalk

Re: Circuit Breaker Orientation (Wiring) Dang, I just noticed a reply to this. Yes, I was having issues. The circuit breaker to the far right failed and wouldn't allow current to flow to charge the batteries. It was masked because when I was on generator, the converter was picking up the load...

Thanks for all the tips! I ended up not buying parts online (except valve seals, ordering today). The only thing the local RV shop had in stock was a 3 inch slip on adapter to glue the exterior drain valve to the PVC. I tried to chip away the 1.5" side, but the plastic was too weak, so I just...

That's really not a bad idea. Heck of a lot easier than tearing it all apart and refitting it all. I just so happen to have a chisel set as well. Sent from my SM-G955U1 using Tapatalk

That's a brilliant idea! Much easier as well. Since I haven't been able to make any headway yet, I'll do as you suggested and add another strap hanger or two. Good point on keeping the lower valve. I'll see what I need to do to revive the other tank valves as I'm not too fond of water leaking...

Thank you! Double elbow. That's what it is. I couldn't even find that in the Lowe's. Sent from my SM-G955U1 using Tapatalk

Thank you! I'll expand my search to the sch40. I think Lowe's and Home Depot is about all we got out here, but I was focused looking for the black stuff, so I probably missed the fittings. Actually, I'll be up on Albuquerque today, so I may be able to find the stuff up there. Sent from my...

Hey everyone! Back for more help. The 1.5" line is leaking right where it connects to the drain Wye. Can someone point me to the right parts to source? 3 inch on the left side, 1.5" on the right. I gotta replace the tank valves as well so I can get rid of that temp dump valve. So I'll be...

Not all breaker banks have a manual reset breaker. My 2014 RW had all automatic breakers. My rig did the same, batteries wouldn't charge and everything seemed to only work while on shore or generator. The breaker connected directly to the batteries was the culprit. I replaced all breakers...

Re: Circuit Breaker Orientation (Wiring) I asked an engineering forum. I'm curious to see what they say about it. Sent from my SM-G955U1 using Tapatalk

Re: Circuit Breaker Orientation (Wiring) This is going to be an interesting discussion. That's what I initially thought, except that the Short Stop breakers that came out and the new "aftermarket" breakers are all labeled with "Bat" on copper and "Aux" on the silver side. One of the online...

I'm replacing all 7 circuit breakers today but want to ensure they were installed correctly to begin with. I couldn't find any source of information that talked about breaker orientation with respect to converter and battery. I know the copper post would be battery and the silver would be...

All of the connections are tight and clean! Since isolating that CB that connects directly to the battery (far right), the hydraulics seem to be working fine now. I'm now suspecting that breaker has been failing for a couple years now. After the last few days of allowing the charger to do...

Well, I'm a dummy. I decided to remove the CBs this morning to make certain that I was not reading the numbers incorrectly since the CBs are so close together. The converter, hydraulics, and battery are 50A breakers, all automatic though. The rest are 30A. I'm going to just replace all of...

Yeah that would be bad. That's probably what that smaller red wire is for. I'm surprised it's not directly connected to the battery. Thank you for all the help! I'm glad that's all it was and of course it had to stop working on our first trip out with new batteries and a new converter lol...

That makes sense. I'll upgrade to 50A on those circuits.... And I found the culprit. It is that CB to the far right that is connected directly to the battery. 13+ volts from the converter CB all the way to the right bus bar, then 12ish volts on the battery side. Hopefully I can find something...

Should the breaker for the converter more closely match the converter rating? So a 60A? Sent from my SM-G955U1 using Tapatalk

WFCO WF-8930/50 (mine is configured in the 50A configuration) I need to figure out what cable from the AC/DC panel goes to the mini CBs. Super odd arrangement. In the photo I posted. The CBs to the far right, the lower red cable is from the batteries. The next red cable to the left going...

1. Yes I agree wholeheartedly! 6 years of having an RV, we've never experienced a problem like this. We've had our current rig for almost 3 years and never an issue. Why so much water is boiling off is beyond me. I talked to PD and they said it sounds like the converter is working...

Yes all off. I'm expecting the batteries to actually carry a load. Prior to leaving for my trip, the batteries read somewhere above 13v. On Sunday, the bedroom slide had a hard time opening. Prior to all of this, all slides operated just fine. The built in LED battery charge status indicator...

There aren't any 50A breakers. All 30A without a manual reset. Not certain of any other locations. Checked batteries again and they measured at 12.74V; individual batteries measured around 6.3V. This is after 24 hours constant charging, not to mention the past week prior to unplugging the...

I had no idea that was a thing... Checking now Sent from my SM-G955U1 using Tapatalk

Hey all! I hope everyone is well! A previous post I created was seeking recommendations for a new converter. I upgraded to the PD9260C converter with the remote. Battery setup is 4x US Battery 2200 XC2 232AH Prior to going to Colorado for some R&R at Mancos, everything seemed fine with the...

See my post where I added an inverter. I added an updated diagram. If you get one with a built in transfer switch, you must ensure it is rated to handle the same amount of power (30 or 50A) if you want to run it directly through your main panel. I just installed a 1000W inverter with a transfer...

Rather than getting a generator, perhaps look at going solar instead. If your RV has a spot for an Onan, use that space for a battery bank instead. I've been researching and it seems I could ditch my generator and save weight by putting batteries in its place along with solar. I've already got 4...

I had to look up the part number for PDs power distribution panel. It can come configured as a 50A with a 30A sub built into it. https://www.progressivedyn.com/rv/acdc-distribution-panels/pd5500-series-ac-distribution-panel-50-amp-240-vac/ The diagram labeling was confusing as well. I know it...

Alright! So to hopefully help others out, I finally figured out why PDs install guide was so confusing: the AC Distribution Panel they used in their diagram is a 50/30 split panel and they are using a 15A breaker connected from 50A side through the inverter input back to the sub panel side...

After going back and forth on deciding a route to take with a new converter and getting an inverter, I decided to stick with PD. At this time, we don’t need a whole lot of AC power when the Gen or Shore power is disconnected, thus the reason for the 1000W inverter. With that in mind, I decided...

Thanks all! Very good thoughts. I had a PD 9200 series on my last rig, so I'm familiar with their features, which is part of the drive to move away from the current system. I do like the sound of an inverter charger though. I'll change gears for now and research those before making any more...

Hey all! I'm picking up 4x US 2200 XC2 232 Ah (6 volt) batteries for my Road Warrior and I am wondering if I should also replace the WFCO WF-9855, 55A converter that came with the rig? We dry camp most of the time, so I want to ensure the batteries are getting adequately charged when the gen...

If it's in good working order I would. But for that price, I'd have it inspected by any shops that have the ability to run full checks. I know the Polaris dealer out by me, Rocky Mountain Supply can perform full diagnostics on them to include load tests. Sent from my SM-G955U1 using Tapatalk

If you don't get it tell me where it's at so I can get it. Seriously, I'd get it if I were you. Before installing it, I'd just replace the coils on the bottom, otherwise it would need to be removed to replace them. Pain in the rear! Put new plugs in and while the plugs are out, do a...

Thank you for the info. Unfortunately I haven't had a chance to look into it. Before we departed the house for part two of travels with everyone, I didn't park the trailer close to the RV box at the house, so I had run the generator to cool the RV down. My wife tried running both ACs and it kept...

The generator is an onan 5500. We were able to use both at the beginning of the month. Nothing had changed since then. We don't have a residential fridge and the heater was off or on propane. The only other item running was the TV. All of which we were able to run at the same time. No...