Search results

Hi Jim, I did copy it there Scott to see just in case Jim did not call me back. I just received a call from Jim and he is looking into what I was told by the dealer. Will keep all involved.

I have left a call with Jim in the warranty department. If the dealer thinks they need to be repacked because of dirt or lack of grease then I would expect they (Heartland) would cover it. I have placed a call and am waiting a reply. Will let all know what I am told. I certainly do not want...

Yes I do and I DO. I agree. The dealer has never steered me wrong but I just could not believe that after only 4000 miles that I need to re-pack the bearings. I plan on calling the factory since it is already in the shop.

This just in....I find it hard to believe that after only about 4500 mi on my 3055 that I am told that the wheel bearing grease is in such a state that it needs to be replaced. Now I know the dealer and have bought three others from them and they have NEVER tried to do nor have they ever done...

Gotcha, Thanx Scott for the reply.....

Thanx, I wish I was one of those mechanically inclined people, but the thought of taking off the bottom cover of the trailer and trying to run a wire that is concealled and hooked up right just isn't my cup of tea...I know I must spend a lot of $ but since the 80's there isn't much mechanically...

Scott, This might seem a little trivial but why did Heartland wire the Bedroom tv on a separate line then the main tv. I tried to install my video switch box and was told by my dealer that for about $200.00 they have to run another line from the bedroom tv to the main tv so that it will work...

Here is advance warning. We will be at Coushatta Casino in Kinder, LA on October 6, so I hope to see another B/H there. We saw one in June but they left the same time we did and we never got to meet.

Scott, Just to let you know...the lens seems to be a little short on the attach points but the few others I have seen are flying off as well....I tried to use silicone and duct tape, they just seem to fly off....I'll see what happens from my dealer, who has been pretty good to me for years now...

..Has anyone had this problem?....The lens on the step light keeps popping off. My 3055 came without the lens, so it popped off during travel for delvery and I have replaced two of them. The third one popped off even with duct tape holding the lens on. Anyway I wonder if the whole light...

Scott, I just wanted to let you know that I believe your QC problems still exist. On my 3055, while camping one morning my GFI plug tripped. It would not reset. I took it apart and with a volt meter found no voltage to the plug. I pulled the breaker panel cover, because the breaker did not...

Nuff said...good site Jim. I hope you "maintain" the professionalism that has been within this site. I know I have passed on information as well as received lots. At least the factory responds to this site, just go to a few other brand name forums and see the repsonses and you'll see.......

Jim, I was just checking, got back just today and I see the post is still under B/H ATF-Kitchen drain 3500...can you move my post to a new ATF with the new thread of check the wires behind the breaker panel please....for both Landmark and B/H If I knew how I would but I still can't figure it...

Wheww!! Just back from another trip and finally come to the forum...I am glad I could just help out....it pays to keep in touch and I am sure If Scott saw it he will deal with the problem.......I taking it in to the shop for some fixes. t all know how it goes....

Hi Jim, I am sorry but I can't figure out how to change my reply to the kitchen drain problem under ask the factory to a new thread....As much as I have tried, just not that computer savy...can you move my last reply to Ask the factory directly....You might even be interested in the...

Big Horn Ask Factory Scott, I just wanted to let you know that I believe your QC problems still exist. On my 3055, while camping one morning my GFI plug tripped. It would not reset. I took it apart and with a volt meter found no voltage to the plug. I pulled the breaker panel cover, because...

Hard to explain but......SAT cable goes directly into SAT receiver, TV gets hooked up to SAT receiver, if that is your set up you cannot see SAT or cable on the same TV without a video switch box, which is not what the L/M or B/H have....disconnect the cable from the TV and hook it up to the SAT...

Well it is amazing what I learn here...to a point i thought the moisture was normal until the Microwave ran for a 10 minute time. After about 10 min. the whole thing shut off. Didn't blow a fuse or anything but just completely shut down, no power..After a couple of minutes I plugged it in...

Finally saw another B/H in Kinder, LA at the Coushatta Casino...I tryed to get over to the unit and get an introduction but I never saw the tow vehicle until we left. Ironically, we left at the same time...anyway at least another one is out there to be seen....

Cheryl, We had ur kids so we went to several (5) different shows including Magic and comedy....Just look around and there is something for everyone. Kids rreally liked the Spirit of the Dance (Irish Dancing) and the majic shows....Have fun..

We drove past it but never went in. Let us know how the park is so my next trip would be a stay there.......Have fun....

Cheryl, We stayed at the Musicland Kampground. Great place everyone is very helpfull and nice. just off the stip and quiet. We looked at ABC but it is WAY OFF the strip and full....you can bring up Musicland on the Internet, was a real neat place, even the kids liked it.....

Well if ya'll install the switch box from camping world, your fraustration will only continue. I have tried and discovered the B/R must be run on it's own splitter separate from the l/R because it all works great in the l/R but won't work at all switching to the B/R. Dealer has no answer maybe...

We spent the last wek in Branson, MO. On the way to and from Texas we did not see another Heartland anything. My rig did look good in the park tho....and it pulled great...

..After many hours of fraustration, I have determined the B/R cable outlet must be on its own line in from the docking station splitter. That is the only way the thing won't work. I have it working just fine swtiching in the L/R TV so it must be the splitter for the B/R. Maybe when I take it...

..I gonna tell you that I have had a wineguard video switch box in all three of my last trailers and they worked fine, however I cannot get it to work in the B/H for some reason. It switches the main tv just fine but it does not seems to work for the B/R tv, haven't figureed it out. Wires are...

Has there been a time and place picked yet????

Well, I can say that we have used this trailer since buying it. I keep the A/C on when at home so it is never stored. The cabnet doors in the kitchen and entry are all warped to the point the doors have to be forced shut....I will contact Scott and see what his solution will be because we are...

Has anyone had a problem with the cabnet doors warping? We have had our 3055 since April and the cabnet doors throughout the coach are warping. Doors are now noticably warped to where the bottom of the doors don't even close flush....Is there a fix or did my coach just get some bad doors that...

sorry, I am referring to the Door Side, D/S rear Living room, L/R...and the other is the Non Door Side N/D/S.....Bedroom is the B/R...will ry to explain myself better.....

I gotta tell all that the vent on the D/S rear L/R works great. But the vent on the N/D/S works very weak. When I looked in the vent, you can see the duct work has been crushed. My B/R is the same but both vents do not put out any volume at all......

Jim, Excellent new logo....Looks great...why do't we kep that one, looks god..

sislv, We bought our 3055 in April and so far love it. When we saw it for the first time it had the regular King but we saw the end of the mattress hitting the vanity. I had the dealer replace it with the mattress that has the cut corners, no problem..Wife says she uses regular king sheets...

..Don't know if this is the right place but will be in Branson the week of June 19

.....another thing for my list......seems to be growing.....

CopperBill, I received my 3055 in April and it also does not have a 12 volt plug in the B/r. When I inquired I was told it does not come that way and that I should have ordered it.....let us know what u r told....

Thanx Jim I am just trying to justify my place here and advertise my new B/H.....and of coarse add my FORD......LOL

..I went through the same thing...walaa, dealer fixed it in an hour..the factory hooks up everthing wrong according to my dealer. The were very familure with the prob.....anyway at least you have B/R SAT hook up..I bought one of those video switch boxs for my old 5er, worked real good, but for...

..well I feel better now....someone else has a ford...I had a doge with a cummins, If you find one let us know cuz I would like that combo too....Hey Jim how come I can't get all my info to come out under my signiture like everyone else?...can u explain how to make that happen?thanx...

.looking at all the pcs can see everyone had a good time, however I guess I have to go out and buy a dodge or Chev because I don't see anyone pulling with a ford. I hope I can be the exception to the pulling rule when we arrive???? Or is there secret pulling a B/H or Landmark rule I was not told...