Search results

part available on ebay

L.O.L...... No secret...... just past experience..... pic of major tools posted..

Yes..... I'm not the only one who had this problem...

Yep! All new. I got to exercise my brain and hands again. Retired now for six years from aviation. I wore many hats, from working on the bench, engineering, inspector , project manager. I liked the bench the best!.....responsible for your own work... no headaches.... no "politics".

Finally completed hand made contacts assembly for the shoreline reel. As posted before, mine burned out. Manufacturer doesn't sell parts nor does anyone else. No one in town would touch the project. $600 brick is now fixed. Went threw a lot of trouble but what the heck, I'm retired , have time...

I have the same problem and posted with pictures with burnt connections.. Same answer from manufacturer.. In process of making new assembly using heavier contacts hand made. I'm using 510 phosphor bronze spring tempered, new copper plated steel studs, lock washer nuts and new phenolic plate...

Nice job! I have the same problem now. My contacts burned out and lost there spring tension. I have .125 thick phenolic for a plate but will upgrade the .020 thick contacts to .040. Threaded studs are 10-32 copper plated steel. Will upgrade to 1/4-20 studs. I think the parts will carry the load...

Yeah.... that's what they told me... liability issues... BUT.... I'd like to sell them a car, tv, refrigerator, vacuum, etc.. When they break ... well .. I'll sell them new. Just about any repair job has potential harmful risks. Repair parts is still big business in any form.

Yeah... it burns my butt to do it . $600 p.o.s for land fill - - - Updated - - - Good eyes... very well could be the cause! Still have to fix or throw it away and hook up old fashion way.

I have a 2015 landmark Newport. recently the connection on the 50amp power reel burned out and almost started a fire. luckily I caught it in time after smelling smoke! Its the connection in the reel that carries 120v a/c. The connection ends terminate on screws mounted on a board the contacts...

Added a kitchen center island light switch for lights above sink located in cabinet face just below counter top centered with sink and just above swing out utility drawer. Originally one switch on control panel and replaced it with a on-on switch and one added to center island. Snaked new wire...

I have two black water holding tanks, two bathrooms. one flows well when cable pulled while the other did almost nothing. found out one valve internally didn't close all the way. It was the cable connection to the valve that wasn't tight and came loose. I just readjusted the cable set screw to...

What make and model are you using now and or recommend as a roof top replacement on a 2015 Newport other than the original make and model ? 15,000 btu unit compatible with original install mount and hole and electric hookup. Original a/c failing too often.

Domestic owns Atwood. - - - Updated - - -

The Dometic ccc2 digital thermostat is capable of performing a lot of features. It all depends on which model a/c you have . (heat pump, heat strip dehumidifier etc) There are micro switches inside the thermostat that must match the control board in the a/c unit. Some features are probably...

I've had both a/c's break. One replaced under warranty because of refrigerant leak and the other I fixed by replacing the burnt out compressor start capacitor. It's difficult to get a mobile authorized mechanic to do warranty work especially on dometic products. Both a/c's lasted one summer...

wrong model number in posted manuals.

Hello--- Got your request. cannot attach the manual. High Pointe is a "brand X" product with no address or web site or warranty etc. Mine is working well with a few quirks. (convection temperature setting is useless) but I make due and it does crisp and brown. Will try posting it to manuals ---...

On our 2015 Newport, there is a spring loaded handle on the fwd edge side with 2 holes for the handle pin for extension adjustment. However ours came with 2 wood screws hidden under the most outboard edge of the table fastened by the factory -(for shipping?) making the adjustment inoperable. Its...

Yes, it's 12v using VERY minimal current. Has a on-off switch. Light strip is 3" long on a stiff flexible shaft. Cig. plug removed leaving the power and stiff-flex wire intake. Extension wire added to tap into 12v wires behind panel. With solder, mods, and install , took about 30 minute...

Added a small led light to illuminate the control panel at night. Soft light to leave on all night , able to read switches and see stairs without disturbance. 2015 Landmark Newport.

FYI --It is a 12v dc light fixture from the factory. The 2015 Newport is. I would think the 2015 Key Largo is too. The pic shown here is what I replaced.

Well then, If you have no clearance restrictions and your light is a/c powered, you literally have hundreds of options from swag , tiffany, chandelier, spots, globes, etc. Check out dinning room lighting at home depot.

In my Newport the ceiling fan is centered. I have a center sink island that both slides track up to leaving a centered ceiling opening of about 27". Plenty of room for a 13" dia. tear drop globe hanging down. I hope this answer your question.

Before I elaborate more, I'd like to see pics of your ceiling light . exterior and interior. Is it 12v dc?

The new ceiling light is from home depot. The "guts" is a marriage of the original and new. I added more bulb sockets and very bright high end warm white led bulbs . This makes the lighting useful when eating and maintains the original 12v system while staying way under maximum watt ratings.

Changed out dinning table ceiling light with tea stained glass fixture and added three more bulb sockets for a total of six. Maintained the 12v dc but used led bulbs as to not go over maximum watt rating. Added light kit to ceiling fan and finished out ceiling crown molding not done by factory...

Hello and welcome . I have this model too. In combination mode, there is no preset temperature . The oven will use microwaves to cook and the convection heat strip to crisp and brown. The unit cannot determine the cooking temperature for food, for it is the microwaves that do the internal...

Thanks for the new complimentary name sign. It's very nice but it doesn't sit flush to the side of the trailer. The usb plug makes it protrude when plugged in. I tried the 90 degree adapter I found with the manuals given but makes no improvement. Is this normal? Attached is a pic. Update. After...

Here are some mods I did to the kitchen to make it more user friendly. Added a wall pantry that clears tracked in slide, wire pull out shelf for the black hole below and a hinge c/top solid surface top with bumpers and stops to prevent accidental finger blood blisters and it from sliding and...

Re: ATF: Landmark - gf electric conection Found the switch! Thanks!

Re: ATF: Landmark - gf electric conection Thanks--- duh!! I feel stupid for not reading completely the panel! All is working.

I have a 2015 Landmark Newport for 2 weeks. There's no power at the gf outlet under the outdoor usb port . No power in that wire run also. All other gf outlets are working. Where does that wire run connect to?

I ordered a 2015 Newport without walking into one. compared it to a bighorn 3875fb walk thru and liked the fp but upgraded to a Newport. Does any one know if the Newport has a stereo system and speakers throughout the unit and what size ,brand ,model number of tv it comes with?