As many in the midwest know we do not keep our toys very long before we (mainly I get the bug). We are upgrading again and are selling our whole rig. We already have a deal done but do not pick up the new rig until May 25th so there is time for someone to get a good deal.
2019 Ford F450 4X4...
My 3870FB is just over 4k on the pin loaded with washer and dryer. ~16500 lbs. With the 4k pin I put on air bags. I get 7.6mpg in windy conditions and 8.6-9.4 depending on terrain loaded. I tend to drive at ~68mph when towing. My unloaded is 11.1 to 12.3 with mostly city driving depending on...
I am going by what is reported for years on the ford truck forum. The 20" Michelin's that were on my 17' F250 had less than half the tread at 22k miles. The Continental tires are well documented to get ~70k. The tire debate often gets debunked when people bring that up as an added cost. The...
The turning radius alone is worth the extra cash for the F450. Not to mention the brakes. The tires are pricey but will also last twice as long as the 18" or 20" that are on the F350. I did not have an issue with financing and I have USAA insurance.
I have the TOGO and like it. I used to use the Weboost but was not happy with it compared to the cost. I bout the higher power one and at the recommendation of Weboost I bought a omni directional antenna that helped a bit. It worked ok but not being able to use MIMO is where it is lacking...
When I was stationed in HI in the mid 90's I delivered pizza to make some extra cash. On one delivery there was a 68 GTO in the garage in great shape. When I asked for more info the lady said she did not know anything about it but was selling it for $1000. Turned out her husband was on...
Hopefully it is pre-wired. There is a blank plate (electrical outlet blank off), usually on the ceiling of your front bedroom that has the cables. Drill a hole through the roof. You can also tell if it is pre-wired if it has the 6 pin controller cable. That is usually in the closet.
I was having issues with one of my controllers and called Dometic. There was a run of bad ones that would do random things. They sent me a new one no questions asked.
At the national rally I installed the Furrion side marker cameras in place of the 2 front side marker lights. They work good but the door side is partially blocked by the awning. I moved it to the other side of the awning mounting channel and fished wires to the front bay. I can not for the...
If you have a generator with a 30 amp plug you can use your 50-30 amp adapter to have both legs hot. However, unless you have soft starts installed on your ac's you will not be able to run both with a 30 amp generator. Even with the soft starts you have to manage your power and wont be able to...
Thanks for the tips. We stayed at the Embassy suites a few years ago and had a beer at Duff's. We have reservations for the KOA in Canada from the 2nd to the 6th of October.
Quick question. We are possibly heading the the first weekend of October. Planning on the KOA on the Canadian side. If we stay on the US side we will still drive over the boarder for site seeing. We have been to the US side of the falls but not camping.
There are 2 options for the baggage door locks. 3/4" or greater than 3/4". I do not have access to my rig for a few days and the 35% off sale starts today. Any input?
My MPG on the 17 F250 was a steady 11.7 around town no highway till I hit over 20k then it increased to 12.9 on the same commute. Not sure on the towing MPG since I got the F450 before the new season.
I agree with your opinion if you do not have a residential refrigerator. If you do then I recommend the 6V batteries. I use 4 so if 1 goes bad I still have more AH then most 2x12v setups. If you do use only 2 6v then a good portable battery pack used for jump starting will operate slides etc...
I am getting 8.5 to 9.5 depending on speed. I weigh in at just over 26K lbs. I can change my fuel filter and replace the water separator in under 15 minuets.
That is my truck and it is a front bath that has a pin weight just over 4000lbs with the washer and dryer installed. That is why it squats like that. The CCC on the sticker is ~4700lbs and the same configured F350 is around 5400lbs. The picture actually looks worse than what it was. It just...
I fought with this many times. What I found in our new rig is that if I ran a cable directly from the dish to the receiver it would work fine but as soon as I hooked up the cables in the RV I could only get 1 sat. I replaced all cable ends and still the same. I did not want cables running out...
The height of the ball should not be an issue. They do make 2 different sizes for the part that connects to the ball in the bed (the one you show in the picture). When I originally had issues with mine they thought I could not tighten it down enough so they sent me a longer one. That did not...
On my 17 F250 they were a huge improvement both unloaded and loaded. On the F450 they are not much different when unloaded but loaded I have them on 8 and there is a slight improvement.
I know the 2017-19 FX4's have Ford spec'd rancho shocks that are complete garbage. When I put the Rancho RS9000 adjustable's on mine the stock ones were already soft.
On our new BH I founds 2 bolts on one side I could not torque correctly (one was sticking out not tight at all). At the rally I showed LCI and they gave me all new bolts, washers, and lock washers. Upon inspection while changing the bolts it looks like they screwed the bolts in since the holes...
My 2018 32RS did not have the pre-wire. If you have the MSRP sheet from dealer it will tell you if it had the pre-wire. If not you will have to run the cables yourself.
I installed it during the pre-rally. Thanks to Don Gilbert for helping me get it on the roof. The rest was pretty easy. I used the mounting plate for added strength. The "pre-wire" for the power cable, located in the ceiling of the bedroom, had a female connector and the one from the sat...
I needed to remove the entry light above the door so I could install the Furrion camera at the rally. It has openings to pry the cover off but they were difficult to see since there was so much caulking. I have included a couple of pictures to show the pry points and the sticker with the part...
Anyone know how to remove he newer led light housing above the entry door. I am trying to install the furrion camera
Sent from my SM-G965U using Tapatalk
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.