I'm guessing a FUEL is not pre-wired for rooftop satellite like some of the high-end models are.
If so, you'll have COAX cables, and a Control/Power Cable going through the roof.
The control cable has to be routed to the location planned for the Controller - you can put it wherever you want, but it needs to be accessible so you can get to the controller to raise and lower the dish.
Assuming you have 2 external COAX connections for satellite, you'll need to run the COAX wires to that location. You may be able to disconnect the COAX wires from the backside of those external connectors and route the rooftop COAX to that location.
If you have a front closet with a nearby vent for a washing machine drain, you might run the wires down through the opening for the vent. Then the Controller could be placed in the closet and the COAX lines could probably be routed through the closet to meet the external COAX connectors in the basement.