Search results

It was 1700 which I hear is a great price. Yeah they pulled the whole slide out.

Well the wife is retiring in 2 weeks,(i've been retired)and we are beginning a full time RV adventure for a while. Florida bound in 2 weeks, attending RV repair school there and then who knows where in June. I would LOVE to be in Colorado in August or September and stay a couple months to sight...

Just got my 2018 Cyclone back from having slide out floors replaced. The worst part about it is I'm meticulous about maintenance and ensuring everything is watertight. Some of these things you don't even know where occurring until it's way too late.

I had to reroute my exhaust from my generator on my Cyclone as well. I just took it to a exhaust shop and they shortened it and now it comes out just in front of my bedroom slide and I hook a Genturi right to it no problem. From the factory it was blowing right up into my slide out in my...

Thanks for the replies. I'll be ordering one this week

Thanks. I checked the voltage going in and coming out with the inverter off. Voltage going in, No voltage coming out. With inverter on there is voltage coming out though but GFCI will trip. Sounding like a bad transfer switch.

I didn't replace a transfer switch yet.

Update: I just noticed that when the inverter is off and I'm hooked to shore power there is no power at all to the refrigerator outlet. What would this indicate?

The inverter is brand new that's the first thing that I replaced, and it seems to be working fine except the GFCI trips when I'm on shore power or fire up the generator. So I'm thinking it's an issue with the transfer switch or else the power control system if that has anything to do with it??

I've read many posts about this issue but I still need some input from you guys. 2018 cyclone with the 1000 w Magnum inverter. About a week ago I was working on my generator and was turning it off and on a good bit. After that I noticed my refrigerator wasn't running and I started to...

Yep they do, I just ordered some. Thanks again!

Yes, but I just need the support legs. I wonder if they sell just those? Thanks!

I need to replace the metal support legs on my toy hauler garage couch/ bed. The one that folds up and out into two bench seats. Cant seem to find them anywhere. Any ideas?

Not sure if you were asking me ? I don't have slide toppers and they should not be required to keep slides from leaking. My slides were leaking from the defective black edge pieces at the bottom that had no butyl tape or any seal at all under them. This is from water running down the sides...

Wow! You would think they could figure that problem out by now. Sad! I have a 2018 cyclone that I saved up for for 10 years, dream camper i thought. 3 slides rotted all to crap now. Sad because i do maintenance all the time and these slideout leaks are unseen until its too late. I cant afford to...

2018 Cyclone, same thing. Rotted all to crap. Took pics, sent to Heartland, spoke to several people all ended up saying that my pics did not prove a manufacturing defect. They know it is! Horrible design. .....

I just installed the Fridge Fixer and it is great!! Finally, after years of using velcro and twisty ties and sometimes finding the doors flung open or the freezer open. It is well worth the money just for the convenience of getting in your fridge on travel days. Amazing product and glad i...

Mine in my cyclone was in the dresser in the front bedroom, no kidding. Left side behind a drawer. Glad when it blew it was on my wife side of the dresser. Who puts that thing in there knowing they blow all the time. I bypassed as well.

malds1981, may I ask who helped you out at HL?

Same thing here, 3 slideouts rotted on a 3 year old rig. HL told me too bad too sad. I think my fridge is about to fall thru my floor.

Ditto Dr53 ! I have a 2018 Cyclone 4151, falling apart, built like crap, rotted slideouts already, getting ready to cost me big money. List of things wrong way too long. No Heartland for me ever again!

Mine did that and it was awful. I looked around for the vent line and found one had a wire tie on it kind of making like and S bend in the hose. Supposedly that is supposed to keep water from being able to get into your tank but I removed it and it has not popped since.

Mine are just like Matt750s.

The support brackets on my 2018 are on each side, above tail lights about the height of the patio railing or a bit higher. It is very possible they were not installed!!

Thanks! Ill check that out.

Where did you get the adjustable vents? I need some of the round ones for my 2018 Cyclone.

Ooops! Yeah youre not supposed to get the mineral spirits on the roof membrane. I touched up some dicor last year and used mineral spirits to clean the old before adding more lap sealant and it was fine. It says to do that but wait at least 15 minutes before applying the dicor. I don't think...

I just replaced my ladder section on my roof of my Cyclone. I cleaned the roof around it and such with mineral spirits then applied the dicor lap sealant. I checked it the next day and it seems the dicor didnt set up, feels kind of mushy. Ive used it before and it usually sets up better than...

Get a venturi for the generator , its great and money well spent. I boondock several months a year. I have a cyclone and i had a shop re route my exhaust pipe a bit more toward the front of the rv so my venturi would attach and run straight up the RV. Mine was exhausting just underneath the...

Whats the torque on the shackle bolts?

Thanks for the replies. Im going to do away with the low point drains and insulate those lines a bit since they are low in the underbelly. I cant believe i didnt realize that was where it was freezing up. I was thinking those drains were at the end of all the plumbing somehow. If i freeze up...

The conduit does encase the fuel lines. I think I can move it out toward center a bit to clear the supports and run in that drop. Do the non correct track supports have that same drop in them to give me room for that conduit?

Thanks guys, there is a T in the lines just above the coroplast so im sure that T was frozen up from the 10 inch drain hanging down beneath the coro. Dane, I dont think I can cap those ends, the T is just too close to the coro. I assume i can just take out the T and put in a sharkbite coupler...

Hey thanks and yes that picture helped! The conduit rest right up against the spring hanger though so I would still need to move the conduit out to lay in that 2-in drop correct?

I just went out and looked to see if I could push them up in the underbelly or bend them up but I don't think that's going to happen they're really stiff right there and there was no play whatsoever in the lines. Has anyone ever just removed those drain lines and coupled the lines up in the...

Hmmm, didnt think about those. They freeze it would keep water from going to the kitchen amd back??

Just got down to 18 last night where im camped in my 2018 cyclone. Furnace ran all night so should have been warm air in underbelly. Also ran the yeti pack and line warmer all night but still had froze up kitchen faucet and rear bath and toilet. Front bath had water and water pump would run. Its...

Its not 2 in pvc but hangs down close to that. Ive attached another pic and a screenshot of what i got from MR. There is not propane running back that far so im sure it has to be the fuel line. Cold as crap and muddy where im camped at the moment or i would crawl under. After the pic do you...

I want to install the Morryde X factor to my 2018 Cyclone 4151. I have a triple axle with the cre 3000 and correct track. Problem is there is a 2 inch white conduit pipe running the entire length where the crossmember would go. I think it has the fuel line from tne generator in it? Has anyone...

Thanks for the replies. I found some at a local dealer.