Search results

Stopped by Camping World in Sherman Texas yesterday. They actually carry the Heartland Fuel lineup. Wow was I disappointed in the fit and finish. I'm starting to think that it may be impossible to buy a good toyhauler regardless of brand these days. Sloppy construction throughout and most...

Have owned a Heartland Razor 5th wheel for eight years. Kids all gone and just me and mamma now. I want to down-size and the T26 looks to be what I want for now. The issue I am running into is no dealer anywhere close to me says they have or plan to stock the T26. Your opinions of ownership...

Fixed the tank fitting with some JB Weld Plastic Bond two-part epoxy. Beats buying a new tank or taking to a repair company.

The 1-3/8 line that connects my two fresh water tanks together on my 2008 Razor trailer are leaking after replacing with a new piece of hose. I have two clamps that were used originally in place and it still leaks a steady drip. Can anyone give me a tip on how to tightened these stupid clamps...

It has been my experience after owning three different RV's over the last ten years that they are all problematic regardless of brand. Some parts and components are better than others but generally speaking manufacturers and dealers are profit-driven and they both will cut every corner they can...

My trailer is a 2008 and doesn't use pex line but instead uses the white drinking water hose for lines attaching to the fresh water tanks. I have two 47 gallon fresh water tanks. The rear tank gets filled first and then water spills over into the first tank. Hard to tell if they are overflows...

I have now found that at least one of the fittings on top of one of my fresh water tanks is leaking. Probably a cracked elbow. Why is there two of these plastic fittings on the top of the tanks? Can they be repaired or replaced? Do they just unscrew from the plastic tank? Btw, While I have...

I will make the call. The sign material is probably more sturdy than the roll material from Heartland.

Makes sense. Sounds like coroplast it is.

Sounds good. What are your thoughts on just using 1/8" plywood instead of the coroplast material?

Had to do some emergency repairs on the 2008 Heartland Razor toyhauler this weekend. Had to remove lots of the black underbelly material to protect from road grim etc. It is a corragated material. It is old and falling apart. Not really sure where to buy it or would like to know if anyone has...

Thank you sir. I will take a look at their site and give them a call.

I did look at it and wow it is really expensive to have a single piece cut that is 8ft. by 7ft. Going to cost about $500 plus glue. I guess I am not sure if that's the way to go. You can find rolls that are 4ft wide but it will have a seam and still cost me about $300. Has no one else...

Ok apparently all the manufacturers use this rhino liner type spray on material on all the tailgates from the factory. That stuff is slippery when moist or wet. Has anyone tried applying or adding additional skid-proof material by painting another coat on? I have a Harley to load next month...

Thanks for the information. I will call Heartland today and Camping World.

My 2008 Razor has a very slippery surface on the tailgate. I see there is a rubber diamond-plate material that some trailers have installed that might work better for a non-slip surface. Anyone added this to their tailgate or had it installed or currently has it and likes it. How is it...

Thanks for the information. Sounds like a bad design. I guess those engineers forgot about heat when they were doing their testing. Maybe I can find a solution as I am not buying a new one at $375.oo.

Graco fuel transfer pump issue My Heartland toyhauler uses a Graco brand fuel transfer pump. I have made lots of calls so far but no real help from Graco. Here's the problem. The pump works fine in the mornings when the temps outside are cooler, but when it gets hot outside, say 85> the pump...

I will get the name off the pump tomorrow and give them a call for some help. Thx.

Fuel pump refuses to work when it gets hot outside. Works fine in the cooler mornings. Any ideas.

Great information guys, still waiting for a return call on shipping quote from Heartland, but it might be easier to drive into Dallas and buy those 5 x 8 footers and piece it together for future access. Thanks.

I did the search and yes I found Coroplast. All the dealers in the Dallas area only sold in smaller sheets 5' x 8' max plus they didn't want to sell to me. Hearland also suggested I contact a local Heartland dealer. I did that but they didn't offer to help me in ordering it either and said...

Thanks. I called and talked to Ross in Parts and he is working me up a shipping quote.

Probably not the correct place to post this one but let's give it a try. I am losing the black plastic corrugated material that attaches to the underbelly of my toyhauler. It is 8' wide and approximately 20' long. I tried calling Heartland but they have not gotten back with me, still...

Heartland sells a access cover through the parts department that measures 8 x 13 for $15 plus shipping. I will probably just go to a hardware store and buy a piece of plastic or plexiglass and make a cover.

Sorry for not responding as I have been having computer issues. Talked to Scott in tech support at Heartland yesterday and he said unfortunately that I have a problem. I have to either remove the refrigerator to access the corner shower faucet or cut out the faucet from the front and make a...

It just turns and thinks.

I have lost the ability to post a reply for the last two days. Don't know what the problem is. who do I contact for help?

It is a one-piece shower but I don't see a white access plate under the faucet. I don't see any access plate anywhere. I will go take a picture and post it.

I own a 2008 Heartland Razor fifth-wheel. It has a corner shower with surround. The faucet assembly is leaking and my RV tech seemed confused as to how to access and remove the faucet to replace or repair it. I read a similar thread dated 4-28-14 where a member had a similar issue. One...

Re: Another case of flat springs Thanks for the input. I will call both dealers in Dallas for springs today. Be Safe. LR.

Re: Another case of flat springs The EMCO springs are made in Tulsa, OK. not in China. I will plan to buy those. That junk from Lippert/China has got to go. So far everything on this trailer has turned out to be cheap. Sorry, I've just had bad luck so far with the Heartland brand. Much...

I have a 2008 Heartland Razor 3110DS and RV shop says my springs are flat and need to replaced. I currently have 6000lb Lippert axles with 4 leaf springs. Shop says for this toyhauler he recommends at least a 5 leaf. Any brands, specific place where you guys have purchased these upgraded...

I have a 2008 Heartland Razor toyhauler fifth-wheel. Have owned for two years with no real issues. Last week I took the trailer out and when returning home realized I had lost the chrome Dicor hubcap on the right rear axle. Looked at the wheel and couldn't see anything that looked bad so I...

Thanks Wingfoot. It was the lower breaker on the generator. Now I'm curious as to why it tripped in the first place. Runs fine for now. LR.

Wasn't sure where to post this so here we go. Recently purchased an 2008 Razor 3110DS toyhauler. Has Onan 5500 generator with only 52 hours. Starts and runs great. Went to turn on my 15 BTU A/c and it only clicks but doesn't come on. Every other appliance does work with the genny. Use 50...

Camping yesterday a Razor toyhauler pulled in. Only the second Razor I have seen since I purchased my 2008 3110DS. Turns out they had the same trailer, same year, but there's was called an "Edge Series". The graphics were different and floorplan was different inside also. I had not heard or...

I have a 2008 Razor and would like to add a battery disconnect. I am told the Cyclones have this feature as standard. Would anyone be so kind as to have a picture of this and where it is located on your trailer? I have seen battery disconnects as cheap as $15 and am concerned about the...

Thanks Jim, I will contact Mike for assistance.

OK, so I have a 2008 Razor with 12 hours on the Onan 5500. Just got trailer a month ago. It is 40 degrees outside, so how do I exercise the genny at a half to full load for thirty minutes a month. This is new stuff for me. Capt.