Project LM 365
- Thread starter Jesstruckn/Jesstalkn
- Start date
-
- Tags
- locks
Jesstruckn/Jesstalkn
Well-known member
I have it all mestup I can't do 2 things at once
I'll fix it
Sent from my XT1254 using Tapatalk
I'll fix it
Sent from my XT1254 using Tapatalk
Jesstruckn/Jesstalkn
Well-known member
Ok starting over
Top 10 Mod. #1 most use Mod yet
I searched all over the web trying to find the perfect cool looking RV door magnet. And had no luck, so I settled on this simple one from OSH/Home Depot. I mounted it in just the right place to be able to still use the factory latch if needed. So far I have not needed it.
This is one Mod that get used on a daily basis.
Sent from my XT1254 using Tapatalk
Top 10 Mod. #1 most use Mod yet
I searched all over the web trying to find the perfect cool looking RV door magnet. And had no luck, so I settled on this simple one from OSH/Home Depot. I mounted it in just the right place to be able to still use the factory latch if needed. So far I have not needed it.
This is one Mod that get used on a daily basis.
Sent from my XT1254 using Tapatalk
Last edited:
Another nice mod Jerrod. Is this the JR Products # 15225 (for LED)? Where did you source them from? This Amazon seller is proud of his
This is where I bought my LED Dimmer. Price is about $ 20 less.
Jesstruckn/Jesstalkn
Well-known member
Nice thanks
Sent from my XT1254 using Tapatalk
Sent from my XT1254 using Tapatalk
Jesstruckn/Jesstalkn
Well-known member
I just ordered one thanks for the link.
Then I tryed to cancel my Amazon order from a few hours ago but they are way to fast and said I'm to late it's already processed.
So now I have 2 coming and 1 says it's for LED lights so I'll see what the difference is.
Sent from my XT1254 using Tapatalk
Then I tryed to cancel my Amazon order from a few hours ago but they are way to fast and said I'm to late it's already processed.
So now I have 2 coming and 1 says it's for LED lights so I'll see what the difference is.
Sent from my XT1254 using Tapatalk
Last edited:
Is this the same tank can you check the numberWithout propaneLOL
Sent from my XT1254 using Tapatalk
LOLhttp://www.propanetankstore.com/40-lb-10-gallon-manchester-propane-tank-with-gauge/
Sent from my SM-T550 using Tapatalk
Jesstruckn/Jesstalkn
Well-known member
Boy I can't tell, that link doesn't have a part # and I can't see the gauge on that picture.
But it says tank with gauge. Maybe you could get them to send you a better picture of it..
Sorry I couldn't help you more.
I bought mine off the floor at my dealer. That's a better deal depending on what they ding you on shipping.
I was told the gauge works good for 5 or 6 fill ups then it fades not sure if that's true or not. If that happens I can always slap a new gauge in it.
Sent from my XT1254 using Tapatalk
Jesstruckn/Jesstalkn
Well-known member
Ya that numbers not on it anywhere.
Sent from my XT1254 using Tapatalk
Sent from my XT1254 using Tapatalk
Jesstruckn/Jesstalkn
Well-known member
Do you want me to check with my dealer and see where they got them ?
They where the only 2 they had and I haven't see them get anymore.
Sent from my XT1254 using Tapatalk
They where the only 2 they had and I haven't see them get anymore.
Sent from my XT1254 using Tapatalk
Jesstruckn/Jesstalkn
Well-known member
Do some of you want to have a little fun with this.
One of my custom Mods....
See if you can figure out what this is going to be.
I had the bottom one made first the decided to go a little more custom and had the top one mad today.
1)Tap plastic cut them out of 1/4 plastic
2) I will only be able to use 1 of them
3) I have not seen this done before .
I'm not going to give any more hints out yet.
See if any of you can come up with where it might go when I'm done ..
The black tape is just to tell how big they are.
Sent from my XT1254 using Tapatalk
One of my custom Mods....
See if you can figure out what this is going to be.
I had the bottom one made first the decided to go a little more custom and had the top one mad today.
1)Tap plastic cut them out of 1/4 plastic
2) I will only be able to use 1 of them
3) I have not seen this done before .
I'm not going to give any more hints out yet.
See if any of you can come up with where it might go when I'm done ..
The black tape is just to tell how big they are.
Sent from my XT1254 using Tapatalk
Jesstruckn/Jesstalkn
Well-known member
Another simple Mod
I made a cushy bed for our Dyson heat/cool fan we use in the bedroom.
Up to now we have just put it in the drawer under the bench in the bedroom to roll around on our travels.
I used a 9" × 27" × 5" foam pad and hacked it up with an electric knife, knowing I was going to cover it, I didn't get to worried about how pretty it was. Then rapped it in a pillow case (for now) DW thinks she want to find some material to match the coach. She will asap trust me.... Now it can ride around in comfort..
I think most of the Landmarks have that bench in the bedroom.
We'll call it the fan coffin.
Sent from my XT1254 using Tapatalk
I made a cushy bed for our Dyson heat/cool fan we use in the bedroom.
Up to now we have just put it in the drawer under the bench in the bedroom to roll around on our travels.
I used a 9" × 27" × 5" foam pad and hacked it up with an electric knife, knowing I was going to cover it, I didn't get to worried about how pretty it was. Then rapped it in a pillow case (for now) DW thinks she want to find some material to match the coach. She will asap trust me.... Now it can ride around in comfort..
I think most of the Landmarks have that bench in the bedroom.
We'll call it the fan coffin.
Sent from my XT1254 using Tapatalk
Last edited:
Oregon_Camper
Well-known member
Mud flaps for your dually truck.
Jesstruckn/Jesstalkn
Well-known member
No
that's what my buddy said to. It goes on the Landmark.
Sent from my XT1254 using Tapatalk
that's what my buddy said to. It goes on the Landmark.
Sent from my XT1254 using Tapatalk
Jesstruckn/Jesstalkn
Well-known member
No sorry Dan
Lower
Sent from my XT1254 using Tapatalk
Lower
Sent from my XT1254 using Tapatalk
