Project LM 365

Bones

Well-known member
Thanks Bones
Yes. Our catch all closet

Sent from my XT1254 using Tapatalk
I'm trying to figure out where I can hang jackets and stuff and shoes. Right now that little sofa seems to be out catch all in our camper right now.
 

2psnapod2

Texas-South Chapter Leaders-Retired
You know you could have ordered that directly from Heartland right? I'm sure your dealer add something special on the price for you. And if you are a Heartland Owners Club member, they will even give you 10% off their price!
 

Jesstruckn/Jesstalkn

Well-known member
You know you could have ordered that directly from Heartland right? I'm sure your dealer add something special on the price for you. And if you are a Heartland Owners Club member, they will even give you 10% off their price!
Ya Thanks
I know that now, when we first bought our LM 365 we had no idea who Heartland was. They were just another RV manufacturer. "Until we found this forum" WOW
This has been so informational and educational to my wife and I.
Our last 3 RVs we just had to do everything through the dealer, and hope for the best.
I have been ordering things straight from Heartland now.
Live and learn...


Sent from my XT1254 using Tapatalk
 

Jesstruckn/Jesstalkn

Well-known member
What mfg and model number for the 40lb tanks with gauges? Thks


Sent from my iPhone using Tapatalk
They are Manchester tanks
73ae377ed4a96161b669795a6e47b12d.jpg

9c6590518f23b612cc45730682938740.jpg


Sent from my XT1254 using Tapatalk
 

Bones

Well-known member
Without propane LOL

Sent from my XT1254 using Tapatalk
Here is something I found online. I really like the idea but we would probably have to get a bunch of people on here to buy them so they would make the larger tank. I think these would work well. They are made by Viking and this is their version of the 31 pound tank. Here
 

Jesstruckn/Jesstalkn

Well-known member
Here is something I found online. I really like the idea but we would probably have to get a bunch of people on here to buy them so they would make the larger tank. I think these would work well. They are made by Viking and this is their version of the 31 pound tank. Here
Those tanks are nice.. We'll have to put see through doors to show them off. LOL

Sent from my XT1254 using Tapatalk
 

Jesstruckn/Jesstalkn

Well-known member
Update;;;; https://heartlandowners.org/showthread.php/54076-Project-LM-365?p=450415&viewfull=1#post450415

Easy Mod
I pulled out the switch next to my bed for the reading lights/tanning booth. LOL
And installed a on/off dimmer switch. Basically plug and play after using 2 male connectors on the new switch. Cut the hole out a bit, gently with a razor knife. The wires in the wall are both the same color, so you have a 50% chance to get it right. No luck for me.... One way the light stays on all the time, and the ether way it all works perfectly.
Now DW wants one on her side too.
3e3bee15b94621dcdd5e57ce27e4f5f5.jpg

9612cfa4c69f48e72abb49b71aa6ce3a.jpg

b9f4c29962aa43ddf11aa42fb34d7100.jpg

f16fdb3d35f3e83b8e7af74ab10b9f25.jpg



Sent from my XT1254 using Tapatalk
 
Last edited:

Jesstruckn/Jesstalkn

Well-known member
Another nice mod Jerrod. Is this the JR Products # 15225 (for LED)? Where did you source them from? This Amazon seller is proud of his :)
Jim I just sat down and was looking at your question and see you asked if it was the LED Dimmer... So no I used that the one I had here and it worked fine. But now I'm wondering what the difference is, I see the LED one has 3 wires and haven't found a wire diagram to see where the 3rd wire needs to go. I'll go in later and see if I can find some info on it.

Sent from my XT1254 using Tapatalk
 

Jesstruckn/Jesstalkn

Well-known member
Another TV Mod
I made a swing out arm that mounts to my tool box. It swings back out of the way when not in use, and then swings out to connect the coiled breakaway cable to when towing. It keeps the cable from getting tangled in my firewood and will actually pull the pin if I loose the hitch and all. I never liked hooking the cable to the hitch like I have been doing for years.
0068c2d7a821fb57dcd74313e3e1394f.jpg

018eae29b47b47ec73543d7853115d69.jpg
72896a475287a6b302c4c28893bb4545.jpg
06e4a2db3ba3c4f0c52abe79d28b6734.jpg
eb6ea33fb8654f3c08b076cc3467cbd1.jpg

ff96b214fb4539222d4ec19af0c33c6a.jpg
fcfc07f271e5d6832bc0a02d1f727628.jpg
ca943ad22fd86269761650efe83f7b2d.jpg


Sent from my XT1254 using Tapatalk
 
Last edited:

Jesstruckn/Jesstalkn

Well-known member
Re: Has anyone used the Electric Waste Valve System

I'll do that thanks
That's a good point and a funny thought to think of DW hitting the wrong switch inside while I'm hooking up the hose outside... I could always put 2 switches an on/off and a dump..

Sent from my XT1254 using Tapatalk
 
Top