sewer

Hello Trail Runners! 2015 26SLE, does anyone have experience replacing the sewer gate valves and know the size/part number? I don't want to take one off with the mess and it be the wrong part lol!

My new 2017 Heartland Mallard M312 has 2 sewer hookups. The one on the left has 2 release valvues and the one of the right has one. How am I supposed to know what valve is the Black tank vs the Grey 1 & 2?

I need to access the sewer valves. What is the best way to access them without permanently damaging the coroplast liner?

Is it possible to hook up a macerator to the sewer boom? Maybe tihis should be in ask the factory???

What is the best sewer hose to buy? Something that is sturdy and won't spring links in less than a year. Thanks, Cindy

Just bought a new 2011 CY 3812 & can't seem to figure out were the sewer hose is stored. Were is the carrier hidden? If there is not one, were & how could one be placed. Thanks Again, Dave

This is a new system I saw being put on the new Keystone Fuzion toy haulers as an option. Has anyone seen one in person and am wondering what exactly they do. Is there a hose stowed so when you swing out the boom it pulls out? If you still have to attach a sewer hose to the end I don't really...

Well we took our 09 Landmark to the Alberta rally and parked it beside an 09 Bighorn with the same floorplan. While I was looking across at it realized that there was a small storage door near the sewer dump that I didn't have on ours. When I asked my fellow rallier what he stored in there I...

I was thinking today (and this is generally a very dangerous process) and thought about why or why not to have a P-trap on the sewer hose. In the last campground I had to use 20' feet of sewer hose to reach the hook-up that was about 15' away so the extra hose would "pop" out of our black...

Added a 6" PVC pipe with threaded female coupling and threaded male cap to store sewer hose and accessories in. Also cut a 4" PVC sewer pipe in half the long way to use as a sliding tray to make it easy getting all hoses out, then can use the 4" pvc on the slinky to lay the hose on to keep it...

Ever since we purchased our unit, every time my husband opens the lid on the sewer pipe to dump, about a cup of raw sewage from the black tank comes out. He can't figure out why this happens. He always dumps the black water first, and then the 2 grays. Could there be a leak somewhere? Has...

has anyone a good idea on how to fasten a 4"X4" plastic fence post as a storge device for your sewer hose . i would like to fasten this to the frame/underbelly near the sewer drain outlet . thanks

I noticed a sewer smell near our kitchen this weekend. The tank sensor did show that the tank was full, so we had stopped using it until we could unload it. I was just wondering if we smelled it because we had overfilled it. Also if anyone knows we have 2 grey tanks in our camper. I am assuming...

We're new to 5th wheels - had a travel trailer. We stored the sewer hose in the bumper on the travel trailer - also added a carrier beneath for the spare. Where do you store the sewer hoses on a 5th wheel - is it specific to the 5th wheel?

Re Edge M21: how long is the 30 amp shore line cable that comes with the rig? Is there a sewer hose included, and if so, how long is it and what fittings come with it?

:( When front air is on and black tank is almost full the smell :eek:is terrible. I didn't notice this last year with the air on. Is the vent stopped up or is this normal, I hope not. Any suggestions appreciated. Bill

I will be setting-up my 36ft Sundance at Campland on the bay in San Diego for 1 month, and would like to have my front and rear clean-outs hooked-up to the sewer drain. I have a Sundance with front and rear baths. Does anyone else do this, and whats your configuration? Im thinking I will...

Where do you store your sewer hose? I can only fit a 10' length in the tube prvided on the undercarriage but with my TT ihad the 8' in the bumper.

So, since the rear cap option doesn't have the standard 4" bumper, do they make any provision for sewer hose storage, or are we on our own? Couldn't find this anywhere. Thanks.

Thought I would share this with you all. Fortunately I am in need of new hoses and this caught my eye. I bought this at Walmart for $29.99. It comes with (2) 10 foot sections, elbow and caps. Couldn't find it on Camco's website. I really like it but the real test will be when I get to use it...

Hi, i'm just a newbie working around the site to see if anyone has a solution to my "problem" I have a 2010 North Trail 28RLS Travel Trailer. We haven't used it yet....still loading it up! Problem is, I don't have any storage area for the sewer hose...other than the too short tube mounted on the...

Just picked up our new 2010 31 RED from the dealer the other day. We are excited about leaving for our first trip next week but I have a simple question. Did I miss something-where do I store the sewer hose?None

We have a 2009 Bighorn 3600RE. we have sewer smells right inside the entrance door after we dump the sewer. Yuck! Happens everytime. What is causing this and how can it be repaired?

I need to replace our sewer hose but before i do i just wanted to know what are the better hoses that some of you are using?What length and what fittings . Not a very exciting purchase but we have to have it. Thanks Scott

So, my original complaint was that the sewer hose compartment on our 3950 was a joke. Yes, the light duty, entry level hose fits in the factory compartment, with only one coupling on. However, when you consider that we need to have two hoses if we want to be on full hookups with both bathrooms...

Just took delivery of a new 3950, which has two doors for Sewer / Gray Water Valves, outside the door is labeled. When you open the door there are three valves in the front door and two valves in the rear door. No labels. Which valve controls which tank ? My Dealer has no idea ? Nothing in the...

Finally got off my rear and installed some storage for the sewer hose. I got tired of having to store it in my outside slider box. Would rather use that box for wheel chocks and wood blocks for the rear stabilizers. I used 4 inch sewer pipe with threaded ends glued on. End cap is attached with a...