happykraut
Well-known member
The original backspalsh was just a piece of wallpaper which was already bubbling up and coming loose. It looked like this. I removed the paper and installed a self adhesive vinyl type tile. It is by the same company as the mod I did on my stove backsplash(documented in another thread). I also replaced the original faucet with one that reaches further into the bowl. The finished job looks like this. Some Home Depots carry this tile @ $10 per square foot or much less for a 12 pack. Very easy to install and can be cut with a pair of scissors. The shiny spots on the top left of the tile is the reflection off the ceiling lights. Here is the URL of the manufacturer of the tile. www.thesmarttiles.com