2nd A/C - Prewire?

themyles

Member
I want to add a 2nd A/C in the bedroom of my '07 3670. There is currently an electric exhaust fan in the vent space. Can I assume that the wire that runs the fan is the proper gauge to run the A/C or do I have to re-pull?
Thanks
 

Jimmyt5

Well-known member
The wire running the fan is 12 volt.
You need to look and see if you are prewired for A/C
 

Ray LeTourneau

Senior Member - Past Moderator
themyles, all exhaust fans in RV's are operated on 12 volts DC. An air conditioner runs on 110 AC. You will have to determine if your trailer had the pre-wire for bedroom a/c option. One way to do this is to remove the interior trim on the exhaust fan and check for a set of 110 wires or a set of double roof joists on both sides of the exhaust fan. The factory can help if you provide them with a Vehicle Identification number.
 

Blessed

Member
My Landmark Monticello was suppose to be pre-wired for the bedroom A/C, but it was not. However, the factory refunded me the extra labor cost that I had to pay because they had to run a new wire. You need to be wired to your thermostat and you need the digital thermostat that can handle two units. At least that how it was on my trailer.
 
Top