3585 Needs Better Light in closet beside door!

[ChazB]

I constantly struggle to see what light switches are on/off inside the closet inside the main door. Why can't Heartland have a light that comes on when you open the door? Leisure Travel figured that one out.

 

[BigJim45]

I constantly struggle to see what light switches are on/off inside the closet inside the main door. Why can't Heartland have a light that comes on when you open the door? Leisure Travel figured that one out.

This is what I bought to use in my cabinet

https://www.amazon.com/Esco-Lite-Wi...id=1472659242&sr=8-92&keywords=led+night+lite

Works grrrrrrrrreeeeeeeaaaaaatttttttt.

 

[pegmikef]

Here's the ones I used. Basically the same as the other poster's, but it is a three pack. My wife likes them for other dark spaces such as under the sink and in the linen closet.

https://www.amazon.com/Activated-LE...8-3&keywords=led+motion+detector+light+strips

 

[GregP]

Do these lights stick well when bouncing down the hwy, or did you need to add a screw or two?

 

[travelin2]

This is what I bought to use in my cabinet

https://www.amazon.com/Esco-Lite-Wi...id=1472659242&sr=8-92&keywords=led+night+lite

Works grrrrrrrrreeeeeeeaaaaaatttttttt.

We have several of these and a couple more are on our wish list. No additional fasteners necessary


Sent from my iPhone using Tapatalk

 

[mlpeloquin]

Copied form others that purchased motion detectors and strip LED lights. Purchased mine on EBAY. Bedroom closets, bathroom cabinet, washer dryer closet, under the kitchen sink island cabinet, and the storage bays. Now all have plenty of light and I do not have to reach for a switch. Lights turn on when doors are opened and no batteries.

 

[BigJim45]

Do these lights stick well when bouncing down the hwy, or did you need to add a screw or two?

No need for any screws. Holds real good.

Sent from my SM-G925V using Tapatalk

 

[pegmikef]

Do these lights stick well when bouncing down the hwy, or did you need to add a screw or two?

For the ones I used (the three pack from Amazon) you will need a smooth surface (e.g., side of cabinet, bottom of shelf, etc.). It uses an adhesive backed magnetic strip that you stick on at the desired location and the magnetic strip fits the back of the light (makes it really easy to remove to change batteries).